Joined: Apr 17, 2005 Posts: 891 Location: New Hampshire
Posted: Sat Oct 14, 2006 7:51 am Post subject:
Looks great hal. My jeep is darker than yours. I went with the ppg paint, that is probably why. I am starting to wonder if mine is to dark. It does seem to match the paint that was still one the jeep however.
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
Posted: Sun Oct 15, 2006 8:06 am Post subject:
Looks real good! I wish mine was in good enough shape to restore. The floor, 1 end panel, and 1 side was rusted out when I got it. The frame also has major pitting. I thought about buying repair panels from Jeep Panels Plus, but would it be worth the expense to restore it? I'm figuring around $400. It's either restore it to go with my 'A1 (I've also got an M416 in good shape to restore after the 'A1), or make a flatbed out of it - the fenders are excellent. What do you all think?
If that is all your looking at I would replace the panels, I had to find and buy the lunette, casting and make new "A" frames that alone was $375...
I have had to make almost all the brake parts; save the brake handle it was bent up pretty bad, I was able to straighten it out... Need to replace the wiring and brake cable along with new tires...
In my opinion if you can save your trailer for $400 go for it, it will be worth the expense sometime down the road... you got to remember an ORIGINAL M-100 is a limited quantity...
My tub is not perfect... it has dings and dents I could not get out due to time constraints (NO room in the garage and the rains came last night ). However I have cleaned all the rust and old paint off, reprimered and repainted all the parts. Rebuilt the axle and lubed all the parts. I got the axle and shocks mounted yesterday, I ended up using the rubbers that came with the shocks, the new shocks did not have tapered mounts to fit the new rubbers I bought...
I will not have a show winner, but it will be correct and original to a point, and mine...
Besides, with me putting money into a restoral I have something to show for it as opposed to the folks that drink their money and have nothing to show; except for a retirement belly...
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
Posted: Sun Oct 15, 2006 10:17 am Post subject:
Yeah, she's got the original wheels, lights and data plates also! I bought a new wiring harness, brake cable and chains about 6 years ago(when I first bought the trailer - I actually got the trailer free! when I bought some other stuff!).
- I do need the little cam that mounts to the frame that the brake handle rod attaches to (I took it off because it was rusted tight, and lost it sometime or another). I guess I could make one if I had a pattern,
>>>In my opinion if you can save your trailer for $400 go for it, it will be worth the expense sometime down the road... you got to remember an ORIGINAL M-100 is a limited quantity... <<<
You've got a point there - now if I can keep my wife off my back about my yard ornaments!!
>>>My tub is not perfect... it has dings and dents I could not get out due to time constraints (NO room in the garage and the rains came last night ). <<<
Beauty Marks
Besides, with me putting money into a restoral I have something to show for it as opposed to the folks that drink their money and have nothing to show; except for a retirement belly...
Exactly!
I think you convinced me to restore her. An M100 would be a better fit for my '54 M38A1 I think, even though the M416 will also work. Now, where did I put that tub when I cut it off?
Well my M-100 is 95% done... Still to do is landing leg pivot (Ordered from D&L Bensinger) and Cable box for front panel (After the first from MWM)... and some minor touch up on the paint...
I made the wiring harness and intervehicle cable...
I put two red oak bows in the tub to hold the tarp up, I screwed 2 sockets used on boats to the inside of the tub for each bow... I got the red oak from Lowe's (1/2"x2"x48" for less than $4 each) I had to cut about an 1 1/2 off to allow them to bend and fit... but I am happy with the results...
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
Posted: Wed Dec 27, 2006 7:04 pm Post subject:
Looks good! Can you give a close up of the bows and brackets? All I have is PVC pipe bows in my M416 - at least it works! You said you made the intervehicular cable? How hard was that?
My intervehicler cable is 2 male plugs with a piece of 6 conductor cable in the middle... As my trailer is set up as an early M-100 with the socket on the trailer, like the jeep. I have found that the socket cover on the M-38 needs to open up to allow the cable to lock into place by the cover...
I bought a cable on eBay that was 26 feet long that had a large male connector on one end, the other had a small female cannon plug. I cut the cable with the large end off to a length of 7 feet and put on the other male connector, I bought from Saturn Surplus ($30) and I had my intervehicle cable. Use only pins A-F and wire straight thru...
For the M-416, its cable is attached to the trailer, you can find these on eBay regularly or try one of the venders... It should have Packard Connectors as opposed to Douglas.
I will try to get photos of the bows and sockets tomorrow... need to take the tarp off to do this, it is supposed to rain tomorrow night, want to do it before the rain starts...
For those that wanted the views of the rib mounting here are photos...
The mounting hardware was aquired from a marine supply store, they are the sockets used to hold ribs for boat tarps... The lumber is red oak from Lowe's for $4 each... I had to take a hand plane and thin the ends down to fit the sockets and also smoothed the corners to help prevent splinters... They will get a good coat of linseed oil later...
I am just putting the finishing touches on my M100 trailer resto. Needs two new tires,and the stars and numbers etc. I went with using the oak "bows" as you did but "made my own "sockets out of 1" wide steel channel with 3/8" "legs." I milled the "slots" in and then drilled two holes for mounting screws in each end. Painted them OD to match the trailer and installed them. (I will try and post images later, of the fabricated parts, if it never quits raining)
Posted: Mon Jan 21, 2008 6:51 pm Post subject: Real nice trailers guys
Hi guys your trailers are really nice. I wish I can do that good.
My M100 needs work see website www.7slotgrills.com/m100project.html
Can I get some tips? PLease contact me I posted under M100 trailer
with some ?
Thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum