m38 fuel pump spacer

[snoopy]

Hi would anyone know the thickness of a m38 fuel pump spacer thanks. I have one which is 5.80 mm but when i fit the pump the engine locks up while turning by hand also the hand primmer lever will not move correctly works ok when of the engine. THANKS

[wesk]

Looks like your spacer is too thin. The correct spacer is 9/16" or 0.5625" or about 14.1MM. Also make sure you have the pump's arm under the cam lobe.

WO PN 800361, ORD PN 8329708
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[snoopy]

thanks wesk.