| Author |
Message |
 Topic: M38A1 Front to rear floor riser measurement |
Doubleclutch
Replies: 2
Views: 1362
|
 Forum: Technical Knowledge Base Posted: Mon Dec 02, 2024 6:15 pm Subject: M38A1 Front to rear floor riser measurement |
Mine measures 4.75"...measured on the back side of the riser, the front side will be a little longer as it rests on the slope of the frame rail.
Hope this helps!
Mike B 
Thanks Mike, it doe ... |
| Topic: M38A1 Front to rear floor riser measurement |
Doubleclutch
Replies: 2
Views: 1362
|
Forum: Technical Knowledge Base Posted: Mon Nov 04, 2024 10:06 pm Subject: M38A1 Front to rear floor riser measurement |
I was wondering if anyone here can give me a measurement of the floor riser where it rest on the frame to the bottom of the rear floor.
http://willysmjeeps.com/v2/modules/gallery/albums/album746/IM ... |
| Topic: 50wt Trans oil |
Doubleclutch
Replies: 4
Views: 2349
|
Forum: Technical Knowledge Base Posted: Mon Sep 12, 2022 8:53 pm Subject: 50wt Trans oil |
| Just another option is Driven Racing Oils. https://drivenracingoil.com/ They have a GL4 80W-90 oil safe for yellow metals, good in the classic transmissions. There hot rod and classic engine oils have ... |
| Topic: Fuel tank well for a M38A1 |
Doubleclutch
Replies: 11
Views: 7962
|
Forum: M Series Parts Supply & Service Review Posted: Sun Jul 11, 2021 3:50 pm Subject: Fuel tank well for a M38A1 |
The tank well is from Debella. This has nothing to do with John or Midwest. I was more interested in if the tank wells come twisted or not, by the sounds of it, they do.
Sorry if I was leading this ... |
| Topic: Fuel tank well for a M38A1 |
Doubleclutch
Replies: 11
Views: 7962
|
Forum: M Series Parts Supply & Service Review Posted: Thu Jul 08, 2021 7:29 pm Subject: Fuel tank well for a M38A1 |
| That's about the way mine looked. If you put it upside down on the floor can you make all four corners touch the floor with hand pressure? If so, it should be fine. Start with the tub and riser sid ... |
| Topic: Fuel tank well for a M38A1 |
Doubleclutch
Replies: 11
Views: 7962
|
Forum: M Series Parts Supply & Service Review Posted: Thu Jul 08, 2021 12:37 pm Subject: Fuel tank well for a M38A1 |
[/img]http://willysmjeeps.com/v2/modules/gallery/albums/album746/image4.thumb.jpeg[img]
Fuel tank well picture.
Not that this can't be installed, it is just going to be a pain with no square point ... |
| Topic: Fuel tank well for a M38A1 |
Doubleclutch
Replies: 11
Views: 7962
|
Forum: M Series Parts Supply & Service Review Posted: Wed Jul 07, 2021 12:13 pm Subject: Fuel tank well for a M38A1 |
| Wes, the shipping box was in perfect condition, not even a ding in a corner. The contents were package very well, lots of padding and nothing could shift. I will post pics when I get a chance. |
| Topic: Photo gallery request |
Doubleclutch
Replies: 1
Views: 2946
|
Forum: Photo Posting & Gallery requests/problems Posted: Wed Jul 07, 2021 10:19 am Subject: Photo gallery request |
Request for a photo gallery.
Dale |
| Topic: Fuel tank well for a M38A1 |
Doubleclutch
Replies: 11
Views: 7962
|
Forum: M Series Parts Supply & Service Review Posted: Wed Jul 07, 2021 7:58 am Subject: Fuel tank well for a M38A1 |
| This is more of an inquiry. I ordered and received a “USA made” fuel tank well for my unit. The tank well I received is badly twisted and is going to be a real chore to install straight. I asked the s ... |
| Topic: Website Problems |
Doubleclutch
Replies: 33
Views: 16262
|
Forum: Technical Knowledge Base Posted: Wed Mar 17, 2021 5:38 pm Subject: Website Problems |
| I am fairly new here considering this my first post. I have just started to work on my M38A1 and have already found so much more information here then I could ever just going through the manuals. Unfo ... |
| |
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
