View previous topic :: View next topic |
Author |
Message |
circleburner12 Member
Joined: May 16, 2011 Posts: 385 Location: arkansas
|
Posted: Mon Oct 15, 2012 12:37 pm Post subject: measurments |
|
|
ive got a m38a1 and im needing the correct measurments for the 3/8 hole for the front bow for the windsheild rod to attach to. ive look and called mv vendors and all seem to have different measurements.
if anyone has a set of original bows, would you be so kind to post the correct measurents. thanks _________________ 1953 m38a1 1953 m100 |
|
Back to top |
|
|
shack Member
Joined: Nov 19, 2008 Posts: 33 Location: Hardy Arkansas
|
Posted: Mon Oct 15, 2012 6:10 pm Post subject: |
|
|
Hi Michael,
Mine is 25 inches center of rivet pin to center of hole. |
|
Back to top |
|
|
circleburner12 Member
Joined: May 16, 2011 Posts: 385 Location: arkansas
|
Posted: Mon Oct 15, 2012 7:31 pm Post subject: |
|
|
thanks shack, lets see what other measurments are out there before wei start drilling. thxs
please post your measurments, maybe myself and others might be able to use the info. thxs _________________ 1953 m38a1 1953 m100 |
|
Back to top |
|
|
bluewatersailor Member
Joined: Nov 19, 2010 Posts: 107 Location: ITALY - TUSCANY
|
Posted: Tue Oct 16, 2012 6:31 am Post subject: M38A1 TOP BOW MEASUREMENTS - confirm and cross-check |
|
|
I measured my original top bow and got 63.75 cm (=25.09") from the center of the rivet to the center of the hole, thereby confirming Shack's data. Going the other direction, I measured 17 cm (=6.692") from the center of the hole to the centerline of the section of top bow that is horizontal when in use. Drill on! David _________________ David Manning
1952 M38A1, 1953 M38A1, 1954 M38-A1, 1952 M100
Photos on Page 10 of Members Albums. |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1744 Location: SO IDAHO
|
|
Back to top |
|
|
|