Body hole locations

danrothe2001 · Member Joined: Oct 24, 2011 Posts: 48

Bought new MDJuan rear panel and side panels. They are missing lots of holes. Wes has some good pictures posted but they have no dimensions. If anyone could help it would be appreciated. Looking for spare tire mount, Jerry can mount, trailer wiring receptacle, reflector and top bow brackets in particular. Thanks

Dan

1953 M38A1

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

I have some aftermarket reflectors and holders if that is one of the items you are after.
They are the same as these.

_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

danrothe2001 · Member Joined: Oct 24, 2011 Posts: 48

I guess I did not write very clearly. I am not looking for the actual parts, just the dimensions and layout on the panels. My panels are blank. I could probably scale it from pictures, but actual dimensions from known good panels would be better. Thanks.

Dan

1953 M38A1

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

Ah, makes sense.
_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

chrisk · Posted: Tue Jan 15, 2013 6:19 am Post subject:

Which pictures of Wes do you mean, maybe I can help.
Chris

danrothe2001 · Member Joined: Oct 24, 2011 Posts: 48

On the first page of his photo album there is a section called M38A1 body parts. Under that are two photos, one of the rear panel and one that says right side brackets. They are all layed out with lines but no dimensions are filled in. This is what I am looking for.

Dan

1953 M38A1

Xamon · Posted: Tue Jan 15, 2013 9:03 am Post subject:

if I am not mistaken this post refers to that photo
http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=4286&highlight=body+holes
_________________
Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php

wesk · Posted: Tue Jan 15, 2013 9:11 am Post subject:

These illustrations I put out on a thread a year or so ago asking someone to fill in the blank measurements.

_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

chrisk · Posted: Tue Jan 15, 2013 9:29 am Post subject:

Hi Dan,
Here are the rear panel sizes of my !956 M38A1(Nekaf):
A=6 3/8";-----O=2 1/16";-------AA=3 1/8";-------OO=6 1/16"
B=6 1/2";-----P=2 1/8";---------BB=3";------------PP=16"
C=1 7/8";-----Q=10 5/8";-------CC=2 7/8";------QQ=17 1/8"
D=4 1/16";---R=2 1/8";---------DD=6 3/16";-----RR=7 1/8"
E=4 3/16";---Sdia=9/16"(2x);--EE=10 9/32";---SSdia=13/32"(2x)
F=7 1/8";-----T=2 1/16";--------FF=16 25/64";--TT=11 1/8"
G=12";--------Udia=1/2"(2x);---GG=7 3/8";------UU=6 1/16"
H=2 11/64";--V=7 3/4";---------HH=3 3/8";------VV=3 1/8"
I=4 1/4";------W=2 1/2";--------II=3 3/16";------WW=5"
J=2 5/8";------X=4 1/4";---------JJdia=3/8"(4x);--XX=10"
K=10 5/8";----Y=9/16";----------KK=3 1/2";-------YY=7 1/8"
L=10 5/8";----Z=2 9/64";--------LL=3 29/32";----ZZ=2 7/8"
M=1 3/8";--------------------------MM=7 13/32"
N=3 9/16";-------------------------NN=6 5/32"
With the best regards from the Netherlands, Chris

wesk · Posted: Tue Jan 15, 2013 9:38 am Post subject:

Chris,

I believe you sent me those once. I need to hunt around and get them transcribed to the photo.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

chrisk · Posted: Tue Jan 15, 2013 9:49 am Post subject:

Wes that's right, on April 22, 2012 I sent an email with the sizes to admin@willysmjeeps.com.
Chris

chrisk · Posted: Tue Jan 15, 2013 9:53 am Post subject:

In the coming days I give the dimensions of the right side.
Chris

STXM38A1 · Posted: Tue Jan 15, 2013 11:16 am Post subject:

On the Rear Panel, could you also include the Total Height ("TH") and Total Width ("TW")? I can see that X + MM +NN should = TH, but I didn't see a dimension provided for NN.

A dimension that filled in between FF and QQ (maybe named "BBB") would provide the sum of the parts for TW.

What is the purpose of the 1/2" holes at deminsions F and YY?

I aspire to repair this:

Thanks,
_________________
Warren
M38A1 12/54 MD 78343

PHOTO ALBUM:
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album33&op=modload&name=gallery&file=index&include=view_album.php

wesk · Posted: Tue Jan 15, 2013 1:16 pm Post subject:

This should work. How about a few folks taking measurements for the missing ones and those with two dimensions listed?

List your answers here:
AAA =
TW =
TH =
K =
L =
Q =
V =
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

STXM38A1 · Posted: Tue Jan 15, 2013 3:43 pm Post subject:

My tub is off the frame, sitting on its side (right side down). Per the previous picture, it's in poor shape, so take these measurements with a grain of salt.

The footman loops on the rear panel are the type welded in place and have no screw holes. Just flat tabs on each side. My point of measurement was from the edge of the right-side tip of the loop(s).

Hopefully, these photos will clarify:

AAA - Dia = 2"
TW - 49 7/8"
TH - 17 3/4"
K - unavailable
L - unavailable
Q - 10 9/16"
V - 7 5/8" (seam to right-hand side of flat welding tab on loop)

If someone else would take measurements off of a good original rear panel, maybe this data will help obtain a consensus.
_________________
Warren
M38A1 12/54 MD 78343

PHOTO ALBUM:
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album33&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.