Posted: Mon Mar 03, 2014 12:35 pm Post subject: Help updating winch mounting frame drawing
Hello Folks,
I have had several complaints that this drawing has several dimensions that are un-readable. I have cleared up many but several remain. If anyone has built this frame or has a better copy of the drawing would you give me corrections for the red highlighted items? Also let me know which if any dimensions are incorrect.
Joined: Dec 03, 2013 Posts: 197 Location: Saint Augustine , Florida
Posted: Mon Mar 03, 2014 6:24 pm Post subject: plans
thx for the better readable prints I didn't have any problems I took them to office max and they inlarged them my frame turned out great just a little problem area with the winch bolt holes thx for your time and effort buzz
Joined: Nov 01, 2011 Posts: 201 Location: Escondido, CA
Posted: Tue Mar 25, 2014 6:53 pm Post subject:
Wes,
I took a close look at the two other drawings you have in your winch photo album that are labeled "Willys Blueprint" and I think I can answer the questions concerning your red circled areas:
At the top and left sides of the top view, the circled values are ±1/64 on the 23 3/4 and 7 ?/16 dimensions, respectively.
In the front view, both circled values are 13/32 for the drilled holes (makes sense for 1/2" bolts).
On the left end of the front view, you have an angle called out at 35°; I believe that should be 30°, both from looking at the Willys drawing and a typical engineering choice.
I could make a new drawing using my mechanical engineering software if it would be useful. I would first make a 3D solid (virtual) model using the dimensions on the old drawings, then make a drawing with front, top and right views, plus any details and sections as needed, from that model. I've done that for radiator support rods and battery tray bracket for other forum members based on measuring parts on my M38 and they were pleasantly surprised with the quality of the drawings. _________________ Jim McKim
1952 M38 son-father project
Slowly turning rusty parts into OD parts
Joined: Nov 01, 2011 Posts: 201 Location: Escondido, CA
Posted: Tue Mar 25, 2014 7:02 pm Post subject: Re: winch frame
buzzk wrote:
the winch frame on the drawings is 26 1/2 I beleave the correct measurement is 25 1/2 thx buzz
That makes sense from the 23 3/4 and 7/8 dimensions, and in the Willys blueprint in Wes's winch gallery the handwritten value looks more like a "5" than a "6". _________________ Jim McKim
1952 M38 son-father project
Slowly turning rusty parts into OD parts
Joined: Nov 01, 2011 Posts: 201 Location: Escondido, CA
Posted: Wed Mar 26, 2014 11:54 am Post subject:
Allrighty, then, I'll do that. It's the least I can do to repay a fraction of all the info I've gleaned from this site. I'll email you a jpeg file or files of images of the 3D model, and a pdf of the 2D drawing unless some other formats would be preferred. I could also supply the native CAD files and common interchange translations of them in case someone would want them.
Your corrections match my interpretation of the Willys drawing. One caution: while I do have an M38, I don't have a Ramsey winch or winch frame, so I'm working off of drawings only. _________________ Jim McKim
1952 M38 son-father project
Slowly turning rusty parts into OD parts
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum