M38 Jeep Restoration MC21002

wadefreedomvehicles · Posted: Wed Jun 17, 2015 9:03 am Post subject:

Ok I will work on getting dropbox accessible, and I was kind of thinking it was civilian. The headligths connectors and insode the heaslight area everything is BEAUTIFUL no rust in there, original olive drab that look like it was just painted. It is amazing. All the connections are good.
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

4x4M38 · Posted: Wed Jun 17, 2015 9:50 am Post subject:

You are right, the insides of your buckets are amazingly clean
including the connectors.

You also have several potentially expensive parts intact including
24 volt generator, distributor and voltage regulator, starter,
as well as aur cleaner and what appears to be the correct carburetor.

On the other hand the inside of that radiator hose does not look
great.

If you are planning on spending much more time climbing
around on the front of the engine do yourself a favor and
remove the radiator guard (grille). You unhook the light wires
and remove from the guard, unbolt the three screws on either
side of the fenders and the whole thing folds down forward right
into your lap. If you raise it up to about 35 degrees you can lift it up
and out of the slots on the hinges that are bolted to the frame
and set it in the work bench.

Sorry I didn't catch it before you pulled the rad.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

wadefreedomvehicles · Posted: Wed Jun 17, 2015 10:17 am Post subject:

Yep, I know it hinges, I just need to disconnect the wires. Also I am going to replace all the hoses, eventually.
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

wadefreedomvehicles · Posted: Wed Jun 17, 2015 9:35 pm Post subject:

So I ordered a Part from midwest military. I had to order the Crankshaft pulley nut. And I ordered a new headlight...
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

Do you plan on bringing it to the 4th event? I think it would be neat to see it there in its current state, just to show people. It deserves to be there Very Happy

From the other side of the tracks,
Brett
_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

wadefreedomvehicles · Posted: Thu Jun 18, 2015 9:47 am Post subject:

Yeah Brett, That is part of the reason why I have not done a whole lot of work on it. I wanted to try to get it running though, I am not sure if that will happen though. Depending on running condition, I might put in parade... But probably not.
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

If I were you, I'd be a little apprehensive running it in the parade at this point. Not knowing all its quirks and no good shakedown runs before hand, it would be no fun breaking down in front of the folks. I do admire your optimism though!. At least be get it to Scera park for that event.
_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

wadefreedomvehicles · Posted: Thu Jun 18, 2015 1:22 pm Post subject:

Yeah I doubt my mom would even let me put it in parade, I will probably just stay with you. Hey we are up to about 48ish vehicles, signed up for the event and parade.
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

wadefreedomvehicles · Posted: Tue Jun 23, 2015 5:03 pm Post subject:

So I got my package from Midwest military today. I ordered a light and the nut I need(crankshaft pulley nut), I got the light, but not the bolt. Mad

_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

wadefreedomvehicles · Posted: Sat Jul 11, 2015 10:29 am Post subject:

Just got My Crankshaft pulley nut yesterday. It was kind of a surprise to me, but I got it. Hopefully gonna move the Jeep into the garage today to start doing work on it.
_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

Sweet, let us know if it rotates.
_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

wadefreedomvehicles · Posted: Sat Jul 11, 2015 9:51 pm Post subject:

Just posted a whole bunch of pictures of "pre-restoration" Also if anyone could help me determine the situation on my bumper mounts. The last 12 photos. I can't tell if all that is after market or what. Confused

_________________
Wade Stout
www.freedomvehicles.org

Willys M38 1951
MC21002

Bretto · Member Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT

That's custom work. Maybe the front end took a hit at one time and they mangled the frame ends so they just blocked it up like that.

I wish I could figure out how to copy your images over. I cant figure out how to copy the url for the .JPG on your photo hosting site.
_________________
Brett
'51 M38
PHOTO DIARY OF MY BUILD

wesk · Posted: Sat Jul 11, 2015 11:42 pm Post subject:

Looks like the original front 3" of the rails have been chopped off and those heavy solid additions added. You have your work cut out for you.

[img]https://photos-3.dropbox.com/t/2/AAC_HJzY1hw25rKjRCiS2ue2MJ-cc1AFHDGl_Jdp8MiXrw/12/67067537/jpeg/32x32/1/1436684400/0/2/P7113191.JPG/CJG9_R8gASACIAMgBCAFIAYgBygBKAI/bnogyjIiUZx4hDh94h_Dg4gOUsaYgNuGIlXP-RQhKmY?size=1024x768&size_mode=2[/img]
Yours

Mine
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.