It was stamped 8000 by a different set of number stamps than used on the 50-R. That's clear to see. I have no desire to argue this with you Mike. It's obvious from your photo that 8000 was stamped by a different set of stamp dies. If Keith is aware of any special 50-R production that went with 8000 he hasn't shared that with us.
Quote:
Hi Wes...... I am curious where the info comes from relating to the 50R being a 5000# winch?
But I simply tried to answer your question and I offered ir-reputable evidence that there are a lot more 50-R's rated at 5000 than the one unit you showed us rated at 8000 with a mismatched plate stamping. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Wes, I am in no way trying to conjure up an arguement either..... You DID offer proof that I asked for, and I appreciate that info.... I just know that this isn't the first 50R that I have seen stamped 8000#.
I shall research further regarding the font issue. I will not imply that I disagree with that comment, rather I just can't agree with it at the present moment.
Maybe, just maybe, since this was a later issue "kit", that Ramsey retested the capacity, and it met criteria for 8000#.......
again, not trying to start disgruntlement, rather fruitful conjecture....
I would suspect your unit is a rebuild that was uprated. You may want to check your actual cable type, size & rating. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
There are two, maybe 3 different Willys Part numbers for the model 50-R.
I will try to locate some information on the reason for the different numbers.
Joined: May 05, 2005 Posts: 109 Location: Del Rio, Texas
Posted: Sun Aug 30, 2015 2:14 pm Post subject:
I choose to use the Safe-line clamp system on my model 50 winch set-up. I like the look. However, I must say I have never put any significant tension on this cable, so I can't really speak to its holding capacity.
_________________ Dan
1951 M38
Joined: Apr 23, 2008 Posts: 92 Location: Kansas City
Posted: Mon Aug 31, 2015 7:17 am Post subject:
Thanks for the picture Dan. I bought one of those connectors. Haven't installed it yet. _________________ Bill
GP, GPA, GPW, M38, M38A1
Bantam T-3, M100
MVPA #1196
All times are GMT - 6 Hours Goto page Previous1, 2
Page 2 of 2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
