| View previous topic :: View next topic |
| Author |
Message |
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16365
Location: Wisconsin
|
 Posted: Mon Jul 25, 2016 12:07 am Post subject: |
 |
|
I'd be careful selecting a lower cup that will fit a M38.
Here are all the cup part numbers:
WWII MB/GPW - WO# A5631 OKS# 613306
CJ2A/3A up to SN 45984 - WO# A5631
CJ2A/3A After SN 45984 - WO# 642863 or 645369
M38 - WO# 118043 HH# 616389
CJ3B, CJ5/6 - 910289
M38A1/M170 - WO# A5631 OKS# 613306 - OPT cup - WO# 119765 UTS# B17915
As Brian mentioned you won't find a M38 air cleaner priced below $200 in serviceable condition.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
 |
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
| Posted: Fri Jul 29, 2016 9:38 pm Post subject: |
|
|
| wesk wrote: | I'd be careful selecting a lower cup that will fit a M38.
Here are all the cup part numbers:
WWII MB/GPW - WO# A5631 OKS# 613306
CJ2A/3A up to SN 45984 - WO# A5631
CJ2A/3A After SN 45984 - WO# 642863 or 645369
M38 - WO# 118043 HH# 616389
CJ3B, CJ5/6 - 910289
M38A1/M170 - WO# A5631 OKS# 613306 - OPT cup - WO# 119765 UTS# B17915
As Brian mentioned you won't find a M38 air cleaner priced below $200 in serviceable condition. |
That Bensinger site is sending me one for $38 all-in. I can commence with refurbishing the original. Hopefully, it fits.
As an update, I changed out the fuel line. I cleaned up and reused the shut off valve. Something about that old brass that just screams "cool". I am rigging a fuel tank until I can install a new one along with seats. Just want to get it cranked for now. Previous owner used a Jerry can and electric pump. Clever, but I want to go back to original config.
I also added a civy type oil filter. It had nothing when I got it. I guess this is a common thing? Man, that plug below the fuel pump port was a real pain.
_________________
Furley
1951 M38
Amateur Tinkerer
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album503&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
| Posted: Sat Jul 30, 2016 6:18 am Post subject: |
|
|
Ain't it though? I have a civvy fuel pump for now. M38A1 pump
on the shelf with kit waiting on rebuild. Bubba had run that line
from the filter back to the firewall and down to the gauge sender
fitting. Using the long fuel line. Impossible to install the missing
oil bath filter.
Got the fuel line off, and the flexible line installed all laying on my
back in the driveway. At least it's done.
The good news is no leaks. I test ran and drove it into the garage where
it now sits in shade and on concrete. 2 years enclosing the carport and getting
everything moved so I could get it in.
Yay!
It is a good feeling to make progress no matter how little.
More pictures Furley!
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
| Posted: Sat Jul 30, 2016 6:34 am Post subject: |
|
|
Looks like you are 12 volt. You've got an original three lever light switch.
That's good. They will work with 12 volts. Missing parts like levers can
be had. No windshield. Priming pump. Original tail lights. All neat stuff.
Civvy CJ tailgate. Bretto shows how he cut out the Willys panel and replaced
with flat plate, and installed the reinforcements on the back. It will work!
The crossover tube is not correct, but you can make one. And it will work
with the M38 or civvy carb.
I'll start a list to keep my eyes out for you. You can use a CJ3A windshield
with a few mods. They are around.
Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
| Posted: Sat Jul 30, 2016 8:50 pm Post subject: |
|
|
I need to go see Brett Mullins. He has a warehouse full of stuff.
He sells on Ebay, but his webpage is a mess to muddle through.
Rapco in Bowie is also a good spot.
We have a lot of great suppliers, but you know there are just shops and garages sitting out there with stuff in them.
Like these A1 doors I'm going to look at tomorrow. He also has a bunch of used L-head engine parts including a block but I don't need any of that stuff.
If I get over to College Station I'll let you know ahead of time.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
| Posted: Sun Jul 31, 2016 10:53 pm Post subject: |
|
|
Finally got the fittings straight for that civy oil filter canister and hoses. It took a few trips to Napa, which wouldn't be so bad if it weren't 30 mins away, each way. Lesson learned: bring the #@$%@ hoses and can with me the FIRST time. Who knew there were so many different types of fittings/sizes/thread pitches? I also managed to bang up my paint job on the canister. All rookie mistakes, I know.
Wife: "Where ya goin?"
Me: "Napa"
Wife: "Didn't you already go there today?"
Me: "Yes"
Wife: "So, why do you need to go back?"
Me: "I am an idiot."
Wife: "I already knew that, what did you forget?"
Me: (start explaining fittings, watch her glaze over)
Wife: "Oh."
_________________
Furley
1951 M38
Amateur Tinkerer
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album503&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
| Posted: Mon Aug 01, 2016 6:27 am Post subject: |
|
|
| 4x4M38 wrote: | I don't know how many times I've had that same conversation....
What's going on with your light switch? Looks like you are missing all three
levers and a couple of other pieces on the lower right lock switch?
I may have some stuff that will help. |
Other than charging the battery, I haven't tackled anything electrical yet. I started to remove the 3-lever switch and stripped some of the screws. They have been painted over more than once. Electrical is next on my list after I get it running. If you have some spare levers, I am happy to buy them from you.
_________________
Furley
1951 M38
Amateur Tinkerer
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album503&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
4x4M38
Member
Joined: May 30, 2014
Posts: 3459
Location: Texas Hill Country
|
|
| Back to top |
|
|
Furley11
Member
![]()
Joined: Jul 24, 2016
Posts: 34
Location: Austin
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
