Posted: Wed Jan 25, 2017 6:42 pm Post subject: OIL FILL TUBE --M38 ENGINE
How far does the oil fill tube extend out of the engine block on an M38 L head engine? In order to get correct dip stick depth into oil pan ? Many THANKS
How far does the oil fill tube extend out of the engine block on an M38 L head engine?
You can never be 100% sure of the answers you get to this question. Lacking a stamped part number on the tube you cannot be absolutely certain which tube you have.
The way I have dealt with this issue is to use the tube I have and start with an empty oil pan and the jeep on level ground. Put 2 qts of oil in the sump. Start with a dipstick that can reach far enough to gage those 2 qts. Now file a notch in the stick at the 2 qt level. Add one qt a time and notch the dip stick at the new level each time. This will leave you with three notches at the 2qt, 3 qt, & 4 qt levels. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum