View previous topic :: View next topic |
Author |
Message |
sblue Member
Joined: Apr 25, 2015 Posts: 8
|
Posted: Fri Mar 06, 2020 5:44 pm Post subject: |
|
|
I replaced my floors and hat channels in my 52 m38 and I got them from john (MWM) fit perfect could not ask for a better fit Thanks john |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Sun May 24, 2020 4:46 am Post subject: |
|
|
Made it back from our deployment to the covid restrictions. My apologies for the Ford photos. I will take it down.
Side note- There was a gentleman I was in contact they here with up in MA who had a m38 body for sale. I can’t find the text info as my cell did a data dump while I was in Panama. Need to contact him as I’m restricted to 50 miles from Portsmouth VA due to COVID. Can’t get to MA at all.
Started the Jeep yesterday for a bit. Hard starting! Unhooked my gas tank as it smells sweet. Hooked an I’ve bottle to start it.
Kaiserwillys has a 10% code for this week. Debating on what parts to buy first. I’m confident I can repair a lot of this body with patch panels, just need to start taking it apart and listing my needs.
Will update this build with more info as it comes. I’m standing by to deploy again soon.
My title finally showed up from Oregon. They are 2 months behind on paperwork, and my plate showed up. No registration fees from now on due to antique status. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054 |
|
Back to top |
|
|
whydahdvr Member
Joined: Jul 18, 2008 Posts: 645 Location: Melrose, MA and Santa Fe, NM
|
Posted: Sun May 24, 2020 7:37 am Post subject: |
|
|
I'm in the Boston, MA area and happy to help facilitate anything once you have the guy's contact info. I'm 100% mobile - we're open and I'm US Army so able to travel anywhere I need to. _________________ North Shore, MA
Santa Fe, NM
1942 GPW
1952 M38
1964 Apollo 5000 GT
De Opresso Liber |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Mon Jun 01, 2020 6:30 pm Post subject: |
|
|
I took the tarp off again and took apart the seats. There was the original canvas, covered by a green OD vinyl and then covered over with a blue vinyl.
The driver seat post is toast. The bottom of the driver seat pan is toast.
Passenger seat looked good overall. I did not keep the spring section because it was rusted and rat hair was imbedded.
Gas tank still has some gas in it. I need to figure out if I need to seal the inside of that tank. Exterior of it seems okay, however the sending unit is destroyed. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:21 am; edited 1 time in total |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Sat Jun 06, 2020 8:41 pm Post subject: |
|
|
90* out in the sun. Took salty apart today.
I really want to rebuild my drivetrain ASAP. But we shall see which happens first.
I have an easier time pushing my 63f100 around compared to this Jeep. I feel like it is just dragging! I will take the drive shafts off tomorrow. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:20 am; edited 1 time in total |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Sun Jun 07, 2020 6:41 pm Post subject: |
|
|
I spent a few hours with the trusty desalt grinder today.
Grinding disks are useless. Cut off wheels are great and flap disc are my favorite.
I cut the rear bumper off. Saved the pintle hook. It’s tough to open. I will get that freed up soon enough,
I need to clean up and punch the rivets off the rear frame area. It was riveted from factory. The front bumper is tomorrow’s job too. That is bolted on since previous owner had a snow plow on this Jeep.
Tried moving Jeep around yard a little to cut the grass. Brakes are dragging. For another day. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:20 am; edited 1 time in total |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Mon Jun 08, 2020 7:22 pm Post subject: |
|
|
Spent two hours tonight out in the yard working on the bumper sections and cutting off a few bolts.
(the images were lost or corrupted so i deleted the post image message telling us this)
Tomorrow I am off. I will roll the frame closer to my patio, set up my engine house and pull the drive train. I can split it all and then drag those bits to the garage out front. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:22 am; edited 1 time in total |
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Tue Jun 09, 2020 6:45 pm Post subject: |
|
|
Had today off of work so I worked in the yard on the Jeep.
Pulled engine, transmission, transfer case, drive shafts and rear leaf springs and shocks.
There used to be a bunch of photos on here, but the post image album i had for it was corrupted and lost. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:23 am; edited 1 time in total |
|
Back to top |
|
|
Roughneck Member
Joined: Oct 31, 2019 Posts: 15 Location: Springfield,MA
|
Posted: Wed Jun 10, 2020 9:32 am Post subject: |
|
|
pulling the engine out is my next project but right now im working on mounting my grill but so far your project is looking good |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
|
|
Back to top |
|
|
CoastieReid Member
Joined: Nov 28, 2019 Posts: 382 Location: Yorktown Virginia
|
Posted: Wed Jun 10, 2020 7:33 pm Post subject: |
|
|
Been doing a lot of reading on my duty days
From the CG colors and coatings manual from 1952. From readings of veterans accounts, they would gather anything they could and make it work. Even stole an army Jeep and painted in CG colors and markings. Anyway. What I been doing on here and other sites for the research as I build.
I tried doing some frame work today but I was dehydrated and it was 95* and humid. Was just too much for me so I went inside.
Only thing I got done was remove three of the four tie downs and broke a bolt off in the frame. That will require drill and tapping.
There used to be a bunch of photos here, but my postimage album had been corrupted and lost- causing big blue warnings stating that in place- i deleted them. _________________ April
i have a build thread on Youtube. just type in CoastieReid in the search.
MC 66792 5/52
Hood # 20942580
L134 # MC 91518
M100 trailer #01279054
Last edited by CoastieReid on Sat Oct 02, 2021 6:24 am; edited 1 time in total |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
Posted: Wed Jun 10, 2020 10:09 pm Post subject: |
|
|
Very interesting to see these pages from your Coast Guard Colors Manual. Especially since the second page lists the early 50's US Fed Std 4 digit numbers along with the Early 50's Coast Guard 2 digit numbers. What is the number of this manual? In the interest of expanding our free reference library for our members I would ask if you could email me a PDF copy of that manual so I may add it to our public files. Any other Coast Guard manuals that mey also apply to vehicles would be nice as well. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
|
|
Back to top |
|
|
4x4M38 Member
Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
|
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16365 Location: Wisconsin
|
|
Back to top |
|
|
|