Speedo/Gauge cluster parts

[4x4M38]

I'm looking for the clip, 7526595 that fastens to the back of the speedometer
on early M38's, that the two wire dash light connector clips in.

Also, stud, 7526594 or what I've seen described as a standoff, that screws onto the 10-32 screw on the back of the speedo, that the spider slips over.
Female on one end, hex body, then a smooth area, then the male end of the thread.

And still looking for the line, WO-801312 that connects between the valve cover and the fording valve elbow.

Thanks,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

[Shug4]

Got a bunch of lines hanging up at home in the garage. Will look when I get home saturday.

[Shug4]

There is a line on ebay for 20.00.

[4x4M38]

Thanks for checking. I was hoping to
beat 20. He took 15.

Matt at QTM had the clip and standoff.

Thanks for the help!
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

[Shug4]

I have the original stud that fits on the back of the speedometer. If you have a couple of thumb screws fit the top bow for m38a1 will trade you.

[4x4M38]

Hey,
Matt at QTM had the clip and standoff (stud).
Thanks anyway.

I need the thumbscrews too!

Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php