Joined: May 30, 2014 Posts: 3452 Location: Texas Hill Country
Posted: Sun Jun 04, 2017 2:04 pm Post subject:
Info is in your Ord 9 G740 available here on line.
Pgs 333 - 335:
Hose, Windshield wiper ru (rubber)
Compounded hvy wall, 7/32 in iD
Wall thickness 3/32 in, 1-1/4 in lg
( windshield wiper vacuum line to tee,
And tee to center windshield wiper
center tube.
Tube, S seamless, pltd, 1/4 OD, 0.030 thkns of wall
Dev length 24-1/2 in (windshield wiper center)
Tube, S seamless, pltd, 1/4 OD, 0.030 thkns of wall
dev length 1-1/4 in (windshield wiper)
Tube, S sesmless, pltd, 1/4 OD, 0.030 thkns of wall
Dev length 27-1/2 in (windshield wiper left)
Try to be more specific like Vacuum wiper system, engine vacuum system or fording vent system. As Brian says you already have the lengths of each tube in your ORD 9 SNL G-740 M38 parts list which if you do not have a paper copy you can download the PDF copy here for free.
There you go, that edit makes it obvious what you are looking for!
Quote:
Does anyone have the correct dimensions for the bends in M38 vacuum lines from the vac pump to the manifold and ws wiper T.?
8676982
TUBE, gas tank vent, assembly
Composed of:
2 NUTS
1 LOOM, 3/16 ID x 45 in long
1 TUBE, S, seamless, plated, 3/16 OD, 0.030 thickness of wall
(Use (86 in) TUBING 44-T-5080-10)
8329638
LINE, bell housing to transfer case, assy
Composed of:
2 NUT
1 TUBE, S, seamless, pltd, 3/16” OD, 0.030 thkn of wall
(use 22 W in TUBING 44-T-5080-10)
(used on engines after serial No. 74419)
WO-807574
LINE, vacuum pump to bell housing, assy
Composed of:
2 NUT
1 TUBE, S, seamless, pltd, 3/16” OD, 0.030 thkn of wall
(use 27 7/8” in TUBING 444T-5080-10)
(used on engines after serial No. 74419)
8673326
TUBE, air cleaner to windshield wiper hose, assy
Composed of:
1 NUT
1 TUBE, S, seamless, pltd, 1/4" OD, 0.030 thkns of wall
(use (14 in) TUBING 44-T-5080-15)
8676981
TUBE, IGNITOR VENT TO WIPER, assy.
Composed of:
2 NUT
1 TUBE, cop, seamless, pltd, 3/16” O D, 0.030 thkn of wall
(use (27 in) TUBING 44-T-5080-10)
LOOM, split, 3/16 x 1 (distributor ventilator tube to cylinder head stud (1))
44-5080-10 TUBING, cop, seamless, soft, anld, size 3/16 in, 0.188 OD,
thickness of wall 0.035 in
If you do not want to make them let me know, I make them check out the For Sale forum...
Contact Me off line at kb1zq at swbell dot net _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
I need the dimentions of the bends from the vac pump to the manifold and from the vac pump to the ws wiper/distributor connection.I have the tubing and I need the correct dimentions for the bends so they fit correctly as if the bends are in the wrong places it will not fit properly.
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Sun Jun 04, 2017 8:04 pm Post subject:
The best way to do this is connect one end loosely and bend to fit... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
