Posted: Thu Jun 23, 2016 6:36 am Post subject: Proper Mounting of Mt-299 with VRC-10
So I'm about ready to mount my Mt-299 with VRC-10 (RT68 and PT112) in my M38. I've been looking for detailed photos of mounted units and they are limited. Before I started drilling holes in the fender, I just wanted to make sure everything looks correct. The photos below are the mount with radio just placed in the approximate location. I will paint the blocks.
One problem I have is the holes in the mount do not line up straight with the holes in the wood blocks. So the wood blocks don't line up with the edge of the mount.
I also want to make sure the radio is supposed to be a small distance away from the side of the jeep.
Everything look alright and correct? Or do I need to change and readjust something? Thanks... _________________ Paul
April 1951 M38
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
Posted: Thu Jun 23, 2016 9:32 am Post subject:
Everything looks ok as you have it, I wouldn't put the radio right against the side of the tub - you'll need a little clearance for the top bows, if you have a top. I painted the wood blocks on my M38 OD. The VRC-10 is bolted driectly to the tub on some metal brackets.
Joined: Apr 14, 2005 Posts: 285 Location: Livermore Ca.
Posted: Thu Jun 23, 2016 10:31 am Post subject:
id put the top bows in place to make sure you can get the wing nut in and out , and give your self some clearance at the top of the front seat frame for which ever side you mount it on, mine was mounted to passenger side so I could reach it _________________ '51 M38 #22936,
'51 M100 Dunbar
#01164782
'53 M100 Dunbar
M416b1
2- M762
MVPA #11788
MVCC LIFER
I am mounting a VCR 10 on my m38a1 too. I have a consult:
Somebody knows if I can get an installation kit with: brackets, antenna cable, screw, nuts. If is yes. Where can I found it?
Thanks in advance, and I am learning to much from you.
Thanks & Regards
Pacho
Thank you Wesk,
Yes I have a copy, but is very difficult see the details, for finish my installation I need the clamps wich fix the cable to floor and panel, I do not know what kind of clamp are. I can not see the number in the drawing, I think are 22 and 23. Somebody have photos with this details?
The 5 clamps #4 ar per drawing SC-A-8367 A drawing I do not have.
the red/black clamps are per drawing SC-D-28130 which I do not have. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum