Crown Pulley doesn't fit

[timjuhl]

I ordered a replacement crankshaft pulley from Quadratec (mfg by Crown) and it did not fit. It's a double pulley and the dimensions are such that it rubs against the timing gear cover. I only needed the forward pulley so to make it work I had to separate the back pulley and remove it. It's kinda cobbled up but it was either do that or throw a tarp over the Jeep while I tried to track down a good original one.
_________________
Tim Juhl
1952 M38A1
1946 Aeronca L16A Army Liaison Aircraft

[G740]

Midwest Military makes a correct double groove pulley for the 38 and A1 applications.
John