View previous topic :: View next topic |
Author |
Message |
TomM Moderator
Joined: Apr 18, 2005 Posts: 458 Location: Rhode Island
|
Posted: Thu Feb 14, 2008 8:27 pm Post subject: Need Transport - Portland Oregon to the Northeast |
|
|
Jeep tub only.
Tom_mackie@trimble.com |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Wed May 21, 2008 5:12 pm Post subject: need transport too!! |
|
|
tom, tom here,
If by chance you find someone that has room, I just purchased an M170 that I need to have p/u in Washington state to be delivered to Brooklyn, ny I will do the same on my end.
thanks |
|
Back to top |
|
|
TomM Moderator
Joined: Apr 18, 2005 Posts: 458 Location: Rhode Island
|
Posted: Wed May 21, 2008 6:58 pm Post subject: its not happening |
|
|
Hi Tom,
I ended up backing out of the project because of time on the other end and the tub had to move quickly. Hopefully summer season will bring that M170 back east.
My M38 came from Seattle. It took a bit of searching to get it here but it got done.
Tom |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Wed May 21, 2008 8:35 pm Post subject: the shipper |
|
|
did you end up hauling the tub yourself or did you forkout for a shipper? If the latter, Have you a dependable contact ? and how much did it end up costing?
thanks for the response!! |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Wed May 21, 2008 9:50 pm Post subject: the shipper |
|
|
did you end up hauling the tub yourself or did you forkout for a shipper? If the latter, Have you a dependable contact ? and how much did it end up costing?
thanks for the response!! |
|
Back to top |
|
|
TomM Moderator
Joined: Apr 18, 2005 Posts: 458 Location: Rhode Island
|
Posted: Thu May 22, 2008 6:49 am Post subject: tub |
|
|
Tom,
I didnt get the tub. The seller sold it to someone else because he needed to move it quickly and I didnt have the time or $ to get it.
Ron Fitzpatrick in Oregon - on the G - did offer to help and he has some transportation connections. You may want to contact him.
Tom |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Thu May 22, 2008 6:20 pm Post subject: |
|
|
thank you very very much Tom!!, I will send him a pm... |
|
Back to top |
|
|
MODIFIED Member
Joined: Mar 28, 2008 Posts: 353 Location: BrOoKlYn
|
Posted: Thu May 22, 2008 6:48 pm Post subject: M38A1 Project for sale in southwest Wisconsin |
|
|
did you check out the M38a1 for sale listed by wes?
M38A1 Project for sale in southwest Wisconsin
I have an M38A1 that is missing lots of parts. It's basically a body and chassis with front seats. Original engine had a cracked block but I have all the rest of the parts and I have a complete CJ5 F-head engine that goes with it. Body is pretty good but is full of drill holes and has the normal passenger side floorboard rust but is otherwise very straight. Didn't have any snowplows on it either. I also have a Leece Neville 24v/100amp charging system that goes with it and a large bunch of other stuff to go, too much to list. In fact, I don't know what all I have till I dig into boxes and make a pile for anyone who comes that day for the jeep. I'd like $800/OBO for the whole thing. Jeep has a clear title in my name and in fact carries a valid Wisconsin collector plate on it. I want to insert photos but don't know how.
she looks pretty good and solid.... |
|
Back to top |
|
|
|