View previous topic :: View next topic |
Author |
Message |
Bretto Member
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
|
Posted: Fri Mar 18, 2011 12:02 pm Post subject: Can someone ID this engine plate |
|
|
I know its not a M38 plate but the guy said it was from a CJ3A chain drive engine. I dont think 3A's ever came with chain drive timing. Correct?
|
|
Back to top |
|
|
sinrisnekaf Member
Joined: Feb 14, 2006 Posts: 18 Location: the Netherlands
|
Posted: Fri Mar 18, 2011 12:43 pm Post subject: engine plate |
|
|
Hi Bretto,
It's look an plate, engine mounting, front part # WO-649823.
Do you have dimensions?
Chris |
|
Back to top |
|
|
Bretto Member
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
|
Posted: Fri Mar 18, 2011 12:52 pm Post subject: |
|
|
Ya I know its a engine mounting plate, I am just confused by the guy's listing as he states its off a 3A but with a chain drive timing setup. To my knowlegde chain driven engine got phased out in the 2A models and never made it to the 3A. To me, I'm sure its just a 3A plate (gear driven) given the dog ears are opposite directions. No, i dont have any dimensions.
Thanks |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 972 Location: South Dakota
|
Posted: Fri Mar 18, 2011 6:34 pm Post subject: |
|
|
The side with the square hole is for fuel pump clearance. The flange forward or rearward is not there, or bent flat?????? You are correct on the timing chain. Got me on the rest. John |
|
Back to top |
|
|
Bretto Member
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
|
Posted: Fri Mar 18, 2011 8:48 pm Post subject: |
|
|
Im not sure what you mean by flange? Are you talking about the tabs that face forward and backward that mount to the actual motor mounts? There are there and bent correctly.
Also how does the timing cover seal over that square hole anyway? |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 972 Location: South Dakota
|
Posted: Sat Mar 19, 2011 5:05 am Post subject: |
|
|
The grey paint made it hard to see, but yes the flat or flange is bent forward, I see it now. The timing cover has a fairly wide flat and the gasket bridges the square hole under the covers flange. When together you see the gasket in the square hole. That is a 3A or 3B front engine plate. CJ5 also. I think the reason it went forward instead of back like the MB or 2A was to clear the double acting fuel pump lower half. I've read where guys get their whole engine done only to find they have the wrong front engine plate and have to change it out after new gaskets and painting Pain! John |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16257 Location: Wisconsin
|
|
Back to top |
|
|
Bretto Member
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
|
Posted: Sat Mar 19, 2011 9:14 am Post subject: |
|
|
I'm running 12V and will soon just be getting a 3A fuel pump anyway. I just wanted to get verification it was a 3A plate. |
|
Back to top |
|
|
|