Joined: Jun 06, 2009 Posts: 73 Location: Corbin, Ky.
Posted: Wed Aug 24, 2011 7:58 pm Post subject: Downloads M38,M38A1 Electrical. Distributor maintance
I was just reading the manual because I am rebuilding my distributor and found that pages 242 through 246 are missing is there some where I can get these. Thanks.
How difficult is it to drive that revit/pin out of the shaft collar _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Striking it tends to swell the end you are striking where it transitions the minute gap between the sleeve and the shaft making removal difficult at best.
It would probably be easier if you drilled it out. If you are worried about mis-alignment while drilling then drill out one side thru the sleeve and maybe a 1/16" into the shaft then support the shaft and sleeve on something solid with a small hole in it for the exiting pin and then drive the remaining pin out. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum