Rifle rack attachment

DFoley · Posted: Fri Mar 16, 2012 5:42 pm Post subject: Rifle rack attachment

So I just purchased a take-off rifle rack for my M38. My jeep windshield frame does not have predrilled holes for the rack brackets. Could someone please provide a diagram of exactly where the holes for the 3 brackets go? What size bolts are correct? Also, exactly how do you attach the rifle rack to the 3 brackets. I did an archive search but came up empty.
Thanks,
_________________
Dan
1951 M38

DFoley · Posted: Sun Mar 18, 2012 8:51 pm Post subject:

Nobody has any advice? I found info on bolt size requirements for attaching the 3 brackets to the windshield frame in Ryan Millers book. But I still don't know exactly where to locate these brackets on the windshield frame. I'm guessing the best way is to attach the brackets to the rifle rack, then hold the whole assembly up to the windshield frame and then make marks where the bracket holes end up and them drill the holes. Does this sound reasonable? I have not been able to find any info on the correct bolts required to attach the rifle rack to the brackets. Any thoughts would be appreciated.
Thanks,
_________________
Dan
1951 M38

OKCM38CDN · Posted: Mon Mar 19, 2012 5:56 am Post subject:

Dan

The bolt types and sizes are listed in the SNL...

The triangular bracket goes on the drivers side of the windshield, just inside the frame...

if you can give me a day or two I can try to get measurements... and photos...

Hope this helps...
_________________
Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK

wesk · Posted: Mon Mar 19, 2012 10:57 am Post subject:

The bolts listed in the ORD 9 are for the bolts that attach the three brackets to the windshield.

The bolts that attach the rifle scabbard to the brackets come in the scabbard kit. You will need to find someone with an NOS scabbard kit that has a copy of the kit contents.

Scabbard installed but the left triangle bracket is missing.

Left triangle bracket and left main bracket

Left main bracket

Right main bracket.

Note the smooth head carriage bolts that should be covered with some thin felt.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

whydahdvr · Posted: Mon Mar 19, 2012 11:34 am Post subject:

I see that MidWest Military is still sold out of their repro rifle racks. Hopefully they'll get more soon.

oilleaker1 · Posted: Wed Mar 21, 2012 7:02 pm Post subject:

Ron Fitzpatrick Jeep Parts/G503 has them.

DFoley · Posted: Thu Mar 22, 2012 4:37 pm Post subject:

Thanks for the info...I purchased a take off part Rifle Rack from ebay and so don't have the bolts which attach the rack to the brackets. Can someone provide some info about these bolts. Also if some one could provide a template of where to drill the bracket holes into the windshield frame..that would be useful. My windshield does not have pre-drilled holes for the brackets.
_________________
Dan
1951 M38


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.