Joined: Mar 11, 2012 Posts: 55 Location: minnesota
Posted: Wed Apr 25, 2012 5:31 pm Post subject: oil presssure mount for a m38
I need an oil pressure mount for my m38 i believe the bolt to the block, i have nothing the previous owner changed out the system for a mechanical guage _________________ 3/52 M38 ser#59697 hood#20908270
Joined: Jan 09, 2010 Posts: 143 Location: Nashua NH
Posted: Wed Apr 25, 2012 7:38 pm Post subject:
I have one,just like new (sandblasted and painted).If interested $20 plus shipping from 03063 about $7. This is the bracket that holds the oil pressure sending unit.
Chuck
All you need is a 1" long 1/8" P nipple and a 1/8" to 1/8" P street elbow. Standard hardware items and should cost about $5. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I thought these were s stamped steel part that bolted on the side of the block the 2 1/4 studs that the old ww2 willys used to hol on the coil. Can some one show me what is correct for a 3/52 m38? pict? I have a 90 nipple on it, but I thought the guy just put that one because he swaped out the gauge for a mechanical type not electric _________________ 3/52 M38 ser#59697 hood#20908270
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
