View previous topic :: View next topic |
Author |
Message |
voodoo4 Member
Joined: Feb 29, 2012 Posts: 13 Location: Florida
|
Posted: Sun Sep 23, 2012 9:13 am Post subject: M38A1 Wiper Motor Tubing Configuration |
|
|
Anyone have photos of their wiper motors installed? I am finishing my windshield up and I am wondering what type of hosing everyone has used for the supply of their vacuum system. Then I want to try and get the new tubing running in all the right places, above, below, behind, etc. The original windshield I found for mine still had the metal tubing but the rubber was rotted away. Does anyone have decent usable photos of the original configuration (the b/w photos in the manual are so distorted its useless.) Thanks in advance. _________________ Voodoo4
2003 TJ Sport
1952 M38A1 USMC |
|
Back to top |
|
|
Wiltshireboy Member
Joined: Jun 20, 2010 Posts: 76 Location: Wiltshire UK
|
Posted: Sun Sep 23, 2012 3:47 pm Post subject: |
|
|
_________________ Andy
M38A1 & M416A1 trailer |
|
Back to top |
|
|
voodoo4 Member
Joined: Feb 29, 2012 Posts: 13 Location: Florida
|
Posted: Sun Sep 23, 2012 11:14 pm Post subject: |
|
|
Thank You! _________________ Voodoo4
2003 TJ Sport
1952 M38A1 USMC |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16253 Location: Wisconsin
|
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1740 Location: SO IDAHO
|
Posted: Mon Sep 24, 2012 9:20 am Post subject: |
|
|
On a (sort of) related subject: can someone provide the length of
the (2) tubes running between the wiper motors on the M-38 with
bottom mounted (std) wiper set-up? _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16253 Location: Wisconsin
|
|
Back to top |
|
|
voodoo4 Member
Joined: Feb 29, 2012 Posts: 13 Location: Florida
|
Posted: Mon Sep 24, 2012 10:03 am Post subject: |
|
|
Thanks Wes. That is exactly what I needed! _________________ Voodoo4
2003 TJ Sport
1952 M38A1 USMC |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16253 Location: Wisconsin
|
|
Back to top |
|
|
voodoo4 Member
Joined: Feb 29, 2012 Posts: 13 Location: Florida
|
Posted: Mon Sep 24, 2012 10:45 am Post subject: |
|
|
wesk wrote: | M38 ORD 9 ref was for Rick. |
I needed the diameters on the tubing. The tubing I found was so thick that it wouldn't all fit at the Y junction. Thanks again! _________________ Voodoo4
2003 TJ Sport
1952 M38A1 USMC |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1740 Location: SO IDAHO
|
Posted: Mon Sep 24, 2012 11:49 am Post subject: |
|
|
wesk wrote: | M38 ORD 9 ref was for Rick.
|
And i thank you. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
|