Posted: Mon Apr 27, 2015 10:24 am Post subject: Tappet cover oil leak
The tappet cover bolts are snug in this photo. Is the leak shown here consistent with a blocked or partially blocked PCV? The engine doesn't smoke nor use oil at an unexpected rate.
This is the same vehicle that I'm working on to restore the vacuum lines for the wiper motors as noted in another post.
_________________ Wade
Baton Rouge, LA
M38A1
M35A3
M37B1
I wouldn't say consistent with a stuck PCV valve. Possible yes. A stuck PCV valve can force leaks at any week point. Your side valve cover is either bent or just has a deteriorated gasket. The PCV valve should be removed periodically, cleaned and re-installed. Ops checking it is simple. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum