Search found 77 matches

Many thanks for the comments. All these came from kits purchased from various suppliers and stated to be resistant. None were NOS as Ron said. That being said, Will try as Wesk stated or just try 100% ...

Just melted another diaphragm in the carburetor with ethanol gas. Will just pure gas help stop this or some sort of additive maybe cool the alcohol down?
Went through several of these over time and f ...

GREAT LOOKING VEHICLE
Would love to see in a show somewhere. Sure a lot of hours has been put into this one. Takes you back into the past a little before i was born. Have a neighbor that is working o ...

Thanks Looking at those pages to see

My 1952 M-38 also measures 2 inches according to metal 12 inch stick
Sure, mine is unmolested model best I can tell.

Been trying to get old jeep out a little and another problem has started in last few days. When you push foot pedal down to engage starter, sometimes will engage and spin engine but a lot of times wil ...

Did place the m-170 voltage regulator on my jeep and it is charging as normal now . Just as the old regulator did,when working. I figured out, that the original one would charge if you manually held ...

I can see why you must remove battery cable before messing with voltage regulator according to Kendall That info was not put on the lid for nothing ,
That is for sure close as everything is.

The one I have is 1967 year, so no where near the early ones according to Wesk.
I thought is was older than that, but not so.

Have one of these. Will try to locate papers on it or look at data plate and let you know. Not one of the earlier ones though I dont think.

Thanks Wesk for the great info on this as always.
Will look into these sheets of info and try to see what to do. Did remove the regulator yesterday and removed the cover. Did not see any thing that ...

ID TAG shows to be a Prestolite
PART # VBC or C could be O ? 4004 UT
SERIAL # 72 or 2 could be Z 1426
25 AMP
SPEC. No MIL-R 10265

Done the steps on page 84-85 of TM9-8012 and did not find any issues. Completed the full field test as Wesk stated from Generator Testing Subject Posted on Friday May 14 2021 for full fielding test. ...

Just lost charging amps on my jeep today. Has two new batteries purchased last few weeks. Looked down at amp gauge and showed 0 Turned lights on and went to discharge. Always kicked up right after en ...

Thanks for the great info Wesk
Will look into these battery chargers


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.