| Author |
Message |
 Topic: Weak windshield wiper pressure |
DavidL
Replies: 6
Views: 7793
|
 Forum: Technical Knowledge Base Posted: Sun Jan 24, 2010 5:44 am Subject: Weak windshield wiper pressure |
| Have very poor wiper pressure on my M38A1. I have replaced most of the rubber hose, but not much difference. Could there be a leak where the pressure originates, or in the motor above the windshield, ... |
| Topic: M 38A1 body sags to the left |
DavidL
Replies: 2
Views: 4672
|
Forum: Technical Knowledge Base Posted: Sun Nov 02, 2008 7:53 am Subject: M 38A1 body sags to the left |
| Thanks GPA - found the message thread and read it all. As usual Ryan gives a long and very clear answer. Thank you for pointing me in the right direction. |
| Topic: M 38A1 body sags to the left |
DavidL
Replies: 2
Views: 4672
|
Forum: Technical Knowledge Base Posted: Sun Nov 02, 2008 5:30 am Subject: M 38A1 body sags to the left |
| When looked at from behind, my M38A1 sags slightly to the left. I renewed the leaf springs and shocks, thinking they were the problem, but it still sags. So do I have a bent frame, or is the tub someh ... |
| Topic: M38AI Viking winch wiring plan |
DavidL
Replies: 7
Views: 14265
|
Forum: Technical Knowledge Base Posted: Tue Sep 11, 2007 4:19 am Subject: M38AI Viking winch wiring plan |
Thank you, Wes!!
You have provided me with all the answers I needed - I am very grateful.
Best, David |
| Topic: M38AI Viking winch wiring plan |
DavidL
Replies: 7
Views: 14265
|
Forum: Technical Knowledge Base Posted: Mon Sep 10, 2007 6:58 pm Subject: M38AI Viking winch wiring plan |
Guys,
Thank you for youre input so far. I have photos ready, but am not sure how to attach them to this response - so have sent them to you separately.
Your electrical smarts are appreciated - thank ... |
| Topic: M38AI Viking winch wiring plan |
DavidL
Replies: 7
Views: 14265
|
Forum: Technical Knowledge Base Posted: Wed Sep 05, 2007 5:49 am Subject: M38AI Viking winch wiring plan |
| The winch electric motor has a small data plate with MBJ 4301 stamped on it. No name. The winch itself has Viking cast into the housing. It is 24v. |
| Topic: M38AI Viking winch wiring plan |
DavidL
Replies: 7
Views: 14265
|
Forum: Technical Knowledge Base Posted: Mon Sep 03, 2007 1:05 pm Subject: M38AI Viking winch wiring plan |
I have an Viking winch that came with my M38A1, but I have no idea how to wire it up, and do not want the fireworks show that results from wrong connections on the 24volt system.
There are three post ... |
| |
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
