Search found 37 matches

After reading this entire thread of bubba's work, I must say that I am one lucky man. I purchased my M-38 from a man who disassembled it, including the engine and left the pistons, head, etc. sitting ...

Wes,
I applied the seam sealer prior to the undercoating and yes, I hope the joints won't rust over time... Confused

This photo was taken prior to the finished product, although he added many other spot welds, the entire joint was not bead welded. I followed his work with seam sealer on those joints and finished wi ...

For what it's worth, I took my M-38 to a local metal fabricator and had the really bad places replaced. He didn't have to do the rounded portions around the transmission area so it wasn't that diffic ...

Thanks Wes, much better!!

Thought it was time for a few more photos...

http://willysmjeeps.com/v2/modules/gallery/albums/Investig8/IMG_1415R.thumb.jpg

http://willysmjeeps.com/v2/modules/gallery/albums/Investig8/IMG_7926R ...

Hello Norb,
I have owned an M-37 for a few years, and while I am not an expert, I found a forum with many, many M-37 owners with many years of experience with them. If not already done so, you shoul ...

Thanks for the assist Ron, I do have a TM9-8012 and after your reference, I guess I had just overlooked that. It will certainly make sure I do it right!
LOL! Thanks again

Thanks Ron for the assistance... It is always great to be able to access this type of information for those of us who are new to the military jeep world... and now I'll fix what I messed up! Very Happy

Hello all,
At the risk of showing my ignorance, I am continuing work on the steering for my M-38 and after installing the drag link with a new kit in it, I realize I had marked it when I took it off ...

Thanks to all,
Dennis

Hello,
I have completed rebuilding the steering gear box for my M-38 and am ready to put the gear oil in it but cannot find anywhere to tell me how much to put in... can someone advise?
Thanks,
Den ...

Hey Ron, no apologies for asking if I had a manual... you should see some of the work a guy obviously WITHOUT one has done...LOL Rolling Eyes

Now for the update. I was finally able to get the entire sh ...

Thanks for the replies, and yes, I do have a manual and did read it before I started, which isn't my normal plan of attack, but never-the-less, having built an M-37, I now try to always do a little re ...

Good Afternoon All.... HELP!! I am replacing shackle and pivot bolts on the leaf springs of my M-38. Perhaps you saw the pivot bolts I removed.. Bad, bad, bad! When moving on to the shackles, two ...


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.