Search found 16 matches

Thank for that info' Wes,

I will give it a few runs and report back.

---------------------------------------------

Mike M38A1

Hi Guys,

I read with interest the article and video on the M38A1 conversion to solid state ignition using a Swiss unit, designed for the M151.
From my 2007 restoration, to date I have gone throu ...

Hi Guys,

I read with interest the article and video on the M38A1 conversion to solid state ignition using a Swiss unit, designed for the M151.
From my 2007 restoration, to date I have gone thr ...

Thanks Guys,
Exchange rate makes the tub $2865 delivered to the UK, the first M38A1 I restored back in 2007 had the complete right hand side body panel ripped off and the fender badly damaged. I sus ...

I have located 'MD JUAN ENTERPRISES' in the far east who can supply a reproduction body tub for my Jeep, via 'Jeep Parts UK' at a cost of £1800 including shipping.

Have any of you guys used one o ...

As you suggested Ed, the register confirms it was built in 1956, I have printed off the relevant pages and have contacted the DVLA to start the registration procedure.

Cheers,

Mike.

Thanks Ed,

I'll give it a try,

Mike.

Hi Guys,
I have another M38 A1 project to restore and have most parts located . The main problem I have is with the Department of Vehicle Licencing in the UK. To obtain an age related registration ...

Thanks Wes and CWD, I will try to cross reference these code numbers in the UK.
Mike.

I AM ABOUT TO CHANGE THE COLOUR ON MY M38A1 AND I AM HAVING DIFFICULTY LOCATING THE CORRECT COLOUR OF POST WAR GREEN, NATO GREEN HAS BEEN SUGGESTED, HERE IN THE U.K. ALL SUPPLIERS HAVE A DIFFERENT ID ...

My M38A1 is in the paint shop and I am trying to determine the correct markings, numbers and star size, It is a 1954, US built Jeep and was used in Europe until sold to the Belgium Police after whic ...

I would like to set up a photo gallery, thanks Mike...M38A1.

Thanks to Troy and Wes I have had a good result with the Carter YS carb rebuild. Now its the wiring, after market indicators had been fitted so I have removed them to put it back to origonal and have ...

Thanks Wes,
That helps, I will give them a try, Mike.

WANTED, For Carter YS Carb. The 'cover plate' that holds one of the diaphragms in position (front one when carb is fitted to manifold). Have tried dealers on Milweb and some in the US, they can supp ...


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.