Search found 116 matches

As always Wes

Thank You

Regards

Hi all,

I remember many years ago seeing a illustration of how the stowage straps go around the Top Bow tubing to secure it on the Jeep. I now cannot find it can anybody point me in the right direc ...

Thank You will get some.

Metal shaper's video pretty much tells it all! Here's a link to my own build post if you want to see the damage that I had on my yokes:

Thank you for your advice and information.

Regards

Nic,
This short video might also help: https://www.youtube.com/watch?v=B4ink1a5Axs

Good luck!

Fantastic.. Once again Thank You!!!!

Thanks for the quick replies guys it's appreciated.
I always buy my spares from John at Midwest and this is where I purchased the seals from. Back one worked a treat first time no leaks whatsoever, f ...

All,

I have a leaking front diff on my M38A1 have replaced the seal twice and RTV'd in all the right places but still have a pesky leak. Searched the forums and mention was made of sleeving using a ...

Thank You for the guidance Wes.

Regards

Nic

All,

I have recently replaced a leaking rear pinion seal with a new one from John at Midwest I included the paper washer and felt seal in the re-build.
I parked it up after a quick run and this ev ...

Hi Brian

Put mine loosely before I installed the dash onto the body, left loose for final adjustment when offering screen to the body.

Regards

Nic

I used a small amount of sponge ( like the stuff you use for washing dishes!!!!)
Dipped the flat portion in pant and dabbed it on over the top of the stencil, this method gives a nice finish.

Nic

I agree Wes, researching this all the vintage/classic car guys are in the same boat and the boat guys too more than likely.

Regards

Nic

Wes

The tank was made to the exact same dimensions and was made out of some form of steel by a professional tank company.

However the bottom area under the filler was made out of the original bo ...

Thank you guys for your replies it is much appreciated.

Even though the tank bottom under the filler is completely covered it looks like surface rust with no floating bits is it best just to monito ...

Yup it was a flashlight not a torch.... good job too as I am a firefighter Very Happy


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.