Author |
Message |
Topic: Fuel pump question. |
USCGmatt
Replies: 7
Views: 6915
|
Forum: Technical Knowledge Base Posted: Wed Aug 27, 2008 5:28 pm Subject: Fuel pump question. |
One more question, well hopefully. I started the jeep up and it ran great for about 5 min then fuel sprayed out the vent on top of the carb. I noticed the fuel in the filter after the pump looked like ... |
Topic: Fuel pump question. |
USCGmatt
Replies: 7
Views: 6915
|
Forum: Technical Knowledge Base Posted: Thu Aug 21, 2008 5:56 am Subject: Fuel pump question. |
Thanks for the quick replys. The only military accessory as of this point is the pump. Thanks again
Matt |
Topic: Fuel pump question. |
USCGmatt
Replies: 7
Views: 6915
|
Forum: Technical Knowledge Base Posted: Wed Aug 20, 2008 5:57 pm Subject: Fuel pump question. |
Is it safe to run the engine with just the fuel pump hooked up (vacuum side ports left open) or will this ruin the pump? My M38 has been civilianized and I am slowly bringing it back to stock. My old ... |
Topic: Pics needed |
USCGmatt
Replies: 7
Views: 7240
|
Forum: Technical Knowledge Base Posted: Fri Sep 21, 2007 2:11 pm Subject: Pics needed |
That is it. I have a hard copy of the book its just misplaced at this time. Thanks again for the info.
Matt |
Topic: Pics needed |
USCGmatt
Replies: 7
Views: 7240
|
Forum: Technical Knowledge Base Posted: Thu Sep 20, 2007 10:54 pm Subject: Pics needed |
Thanks, more reason to find where I put that book. |
Topic: Lift shackles |
USCGmatt
Replies: 2
Views: 5766
|
Forum: Wanted Posted: Wed Sep 19, 2007 10:17 pm Subject: Lift shackles |
I just bought 2 front ones from MWM. I got the shackles and pins, good quality.
Matt |
Topic: Pics needed |
USCGmatt
Replies: 7
Views: 7240
|
Forum: Technical Knowledge Base Posted: Wed Sep 19, 2007 10:11 pm Subject: Pics needed |
Thanks for the quick reply. Are the bolts cut flush with the nut? Thanks again.
Matt |
Topic: Pics needed |
USCGmatt
Replies: 7
Views: 7240
|
Forum: Technical Knowledge Base Posted: Wed Sep 19, 2007 9:25 pm Subject: Pics needed |
Or maybe just some info. I just received my soft top hardware for my m38 and was wondering why the nuts are welded on the outboard side of the bracket? Are you supposed to run the bolt from the inside ... |
|