Author |
Message |
Topic: Starter Issue |
UncleSam
Replies: 3
Views: 4546
|
Forum: Technical Knowledge Base Posted: Tue Dec 11, 2018 8:40 am Subject: Starter Issue |
Thank you for the response wesk!
The actuating arm is exposed, so I can see it throwing out every time the key is turned.
Last weekend I did 2 things:
1) I bench tested it and is far as I can ... |
Topic: Starter Issue |
UncleSam
Replies: 3
Views: 4546
|
Forum: Technical Knowledge Base Posted: Fri Dec 07, 2018 4:21 pm Subject: Starter Issue |
- 1953 M38A1
- I've uploaded a picture of the starter, I don't know what kind of starter it is (it may not be the correct one)
- The issue: About 3 out of 4 starts, the starter spins and doesn't e ... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Thu Oct 12, 2017 9:41 am Subject: M38a1 Idle Issues |
I APPRECIATE ALL OF YOUR HELP!
I'm pretty sure it's running good now, at least all last night I drove it around with no problems. The only issue is that I changed a couple things, so I'm not 100% on ... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Wed Oct 11, 2017 1:38 pm Subject: M38a1 Idle Issues |
Neither the old or new metering rod measurements were exact. The one I took out read "75-595s" which I think is wrong for a M38A1?
I tried to verify that my carb is a YS-950S.
The markings on it i ... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Wed Oct 04, 2017 7:04 am Subject: M38a1 Idle Issues |
1) Changing the ignition coil didn't help, I read that they may fail when they get hot.
2) I do have an electronic fuel pump, so I added a fuel pressure regulator and currently have it set to 2.
... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Tue Oct 03, 2017 3:54 pm Subject: M38a1 Idle Issues |
Still working on this issue...
I added the hose, I have the float set correctly now, and I added a fuel pressure regulator(set on 2). I also changed a fuel filter that was clogged. It overall runs be ... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Wed Aug 09, 2017 10:47 am Subject: M38a1 Idle Issues |
I got my kit from here: http://www.ebay.com/itm/Willys-M38A1-M170-Carburetor-Master-Rebuild-Kit-Carter-YS-950-Jeep-Carb/171634790931?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
O ... |
Topic: M38a1 Idle Issues |
UncleSam
Replies: 11
Views: 21425
|
Forum: Technical Knowledge Base Posted: Wed Aug 09, 2017 6:31 am Subject: M38a1 Idle Issues |
I have a 1953 M38a1 with a YS Carburetor.
It has trouble idling, but only after running it as high RPM's for an extended amount of time. When I go out and start it for the first time that day, it wil ... |
|