Search found 12 matches

I talked to the place that someone told me about in Atlanta, but he stated that he would bead blast by tub and dip the fenders. The fenders would cost $2.50 per lb and the tub would cost around $500. ...

Thanks for the info Chuck.

DOES ANYONE KNOW A PLACE WHERE THEY DIP AUTO BODIES IN A CHEMICAL TANK TO REMOVE RUST AND OTHER "STUFF"? I LIVE IN SOUTH GEORGIA SO I WOULD LIKE A PLACE CLOSE BY.

Thanks Ryan, I will check with a local mechanic shop and see if they have some type of press.

The leaf springs have a u shaped shackle on one end and on the other end there is a bushing which has an inner piece of metal surrounded by some type of rubber material and then another piece of metal ...

What is the process for replacing the leaf spring bushings? How do you remove the old ones and how do you install the new ones? I am referring to the bushings on the opposite end from the shackles. ...

Thanks Wes. I don't have a spring shop near by, but I will make sure the center bolt is adequate.
wayne

Thanks for the help Ryan.
Wayne

I am putting my leaf springs back together, but some of the bolts are no up to par. Is the bolt that goes through the center of the leaf springs and the bolts, 6 per spring, that go through the c-sha ...

Wes,
Thanks for the help, I figured I would have a hard time finding the bolts after I was unable to find them at a parts supplier. I am unable to reuse most of mine due to rust.
Wayne

Where can I find bolts for leaf springs? I need the center bolt that goes through the middle of the springs and holds them together. I also need the bolts and spacers, quantity of 6 per spring, that ...

You really did a good job putting your site together!
cairopd123


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.