Search found 426 matches

I've given up trying to load a picture, but it's the bottom diagram so it looks like this M38 was rebuilt with M38/A1 axels front and back by the Military Aid Program. Guess they just had to knock out ...

Hi Wes, it seems to be taking ages to process the picture I'm trying to uplaod.
From the digrams you posted above it's the botom diagram I have on my M38.
Thanks, Dave.

Hi Wes,
I think there's a misprint in my TM 9-236.
I'll post some pics tomorrow, if the A1 and M38 rear axels are interchangable I'd bet it's simply had an A1 axel fitted at some point.
all the bes ...

Many thankds Wes,
I've been Googling images of axels till I'm quite confused. My TM 9-236 tells me the A1 axel is fully foalting but the MC axel is semi floating but when I look at explodeed images I ...

Hi all,
after 20 years (ish) one of my rear wheel oil seals failed (CR 13710) so it's pull the taper half sfatft time and fit some new brakes shoes etc.

This M38 has a bit of history, rebuilt in K ...

Hi all,
now the warmer weather is here and I can work outside I'm going to try and get the winches on the M38 and the M201.

When I manage to upload the pictures I'll show you what I have.
Actual ...

Hum, the water pump boss has no number,Which I thought odd. Where am I looking for the water hole in the back of the block?
Ta, Dave.

Ah, thank you Wes, the M201 has the option to set up it just the same, has the threaded holes but with plugs in them.

Just got my engine back from the 'shop' I'd assumed for 20 years the 'metal bl ...

Hi all,
Can anybody tell me why the M38 has a Head/Pump water by pass but the MB doesn’t?
Ta, Dave.

I don’t know if I do right, but I engage the free wheel hubs regularly just to make sure lubricant is getting spun everywhere and nothing dries out.

Hello all,
I’m trying to date my M38 block. It is the later rear flange type modified for better fording i believe.
Behind where the drag link would be I have the following cast into the block.
2 ...

Hi all,
does anybody know the size (not the part number) of the Wood Ruff key on the output shaft of the correct (short) M38 PTO.

Next, for the M38A1 (Ex UN forces) Ramsay H-200 Winch.

Also, if ...

Ah, suprerb sir, thank you. In the upper picture does it also clamp to the air cleaner bracket for support? I think the 2nd lower picture shows me what I need to know, 2 bars clamping under the bonn ...

If I can find a picture of it and the cables insitu I'll just make one, hence I need a picture of one in place.
Thank, Dave.

Hi,
thank you for posting that, thing is by the time that bar gets to me in the UK it'll cost around $55 plus around $15 dollars handling charge by out customs and a $15 dollar import charge hence I ...


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.