Author |
Message |
Topic: Transmission tower plugs |
garcia63
Replies: 4
Views: 2259
|
Forum: Technical Knowledge Base Posted: Wed May 19, 2021 2:04 pm Subject: Transmission tower plugs |
Well the socket came in and worked perfect, both tower plugs were loose. I also replaced the inspection cover with the correct one, the old one was a piece of half inch steel. That’s where the majorit ... |
Topic: Transmission tower plugs |
garcia63
Replies: 4
Views: 2259
|
Forum: Technical Knowledge Base Posted: Sat May 15, 2021 12:06 pm Subject: Transmission tower plugs |
Same plugs!! Just ordered the socket thanks! |
Topic: Transmission tower plugs |
garcia63
Replies: 4
Views: 2259
|
Forum: Technical Knowledge Base Posted: Sat May 15, 2021 11:36 am Subject: Transmission tower plugs |
working on my transmission tower for a 1951 M38 and have a leak where the hex plugs in the front are. I am trying to get the plugs tightened or off to get some sealant on the plug. What size hex is ne ... |
Topic: Bellhousing cable boot |
garcia63
Replies: 2
Views: 5173
|
Forum: Technical Knowledge Base Posted: Mon Oct 03, 2016 8:14 am Subject: Bellhousing cable boot |
M38--thank you sir--Part Number 8328439 Clutch cable boot adapter would be the part I was looking for--already found it with a couple of vendors. |
Topic: Bellhousing cable boot |
garcia63
Replies: 2
Views: 5173
|
Forum: Technical Knowledge Base Posted: Sun Oct 02, 2016 7:25 pm Subject: Bellhousing cable boot |
I will be replacing the cable boot to the bellhousing and noticed that there is some thread marks on the inside of the hold where the cable goes into the fork. I looked at the illustrations and could ... |
Topic: Transmission mount bolts |
garcia63
Replies: 5
Views: 7693
|
Forum: Technical Knowledge Base Posted: Tue Jul 26, 2016 2:55 pm Subject: Transmission mount bolts |
yes sir, that is exactly what I was looking for--thanks. |
Topic: Transmission mount bolts |
garcia63
Replies: 5
Views: 7693
|
Forum: Technical Knowledge Base Posted: Tue Jul 26, 2016 6:14 am Subject: Transmission mount bolts |
No looking for the transmission plate bolts, i saw the bolts referenced but thought those were for the 4 cross member bolts. I will compare those bolts up to the plate and see if they match up to the ... |
Topic: Transmission mount bolts |
garcia63
Replies: 5
Views: 7693
|
Forum: Technical Knowledge Base Posted: Mon Jul 25, 2016 5:06 pm Subject: Transmission mount bolts |
I looked thru the ORD 9 SNL G740 and could not find the transmission mount plate assembly for the 51 M38. I lost the 4 bolts and the 2 nuts on the plate bottom going into the base of the transmission, ... |
Topic: M38 draglink |
garcia63
Replies: 3
Views: 4755
|
Forum: Technical Knowledge Base Posted: Thu Mar 17, 2016 4:29 pm Subject: M38 draglink |
Just got a used draglink off of ebay. I will be working on the M38 this weekend--were the M38, M38A1 and M170 draglink all the same length?
Hard to tell with the old one i took off, it had many cur ... |
Topic: M38 driver/passenger seat heights |
garcia63
Replies: 3
Views: 5317
|
Forum: Technical Knowledge Base Posted: Fri Sep 04, 2015 2:29 pm Subject: M38 driver/passenger seat heights |
Looks like you were right on target Wes--driver side has some bending on it compared to passenger side.
http://willysmjeeps.com/v2/modules/gallery/albums/album315/IMG_0126.jpg
I remember seeing s ... |
Topic: M38 driver/passenger seat heights |
garcia63
Replies: 3
Views: 5317
|
Forum: Technical Knowledge Base Posted: Thu Sep 03, 2015 9:16 am Subject: M38 driver/passenger seat heights |
Looking at my driver seat it appears about 2 inches higher then the passenger seat.
/ihttp://willysmjeeps.com/v2/modules/gallery/albums/album315/jeep2rear.sized.jpg
The legs on both the passenger ... |
Topic: Texas 1952 M38 |
garcia63
Replies: 11
Views: 20065
|
Forum: Jeep Project Threads Posted: Tue Jul 28, 2015 7:34 pm Subject: Texas 1952 M38 |
Thanks Wes and Brian--I will work on the hypothetical questions with the DMV--I guess their answers will determine if I will have a CJ3a with a M38 frame or a M38 with a CJ3a engine--either way it won ... |
Topic: Texas 1952 M38 |
garcia63
Replies: 11
Views: 20065
|
Forum: Jeep Project Threads Posted: Mon Jul 27, 2015 7:24 pm Subject: Texas 1952 M38 |
I have the tie down straps bolted in, shocks have bolts instead of cotter pins and the bumper is bolted on.http://willysmjeeps.com/v2/modules/gallery/albums/album315/4_G.sized.jpeg
http://willysmjeep ... |
Topic: Texas 1952 M38 |
garcia63
Replies: 11
Views: 20065
|
Forum: Jeep Project Threads Posted: Sun Jul 26, 2015 7:56 pm Subject: Texas 1952 M38 |
Well I am confused--the dash plate shows 65804 with a manufacture date of 5/52
Engine block shows 3J82114--CJ3a?
The title has it as a 51 with vin of 3J82114.
I know all the paperwork shows a ... |
Topic: Texas 1952 M38 |
garcia63
Replies: 11
Views: 20065
|
Forum: Jeep Project Threads Posted: Wed Jul 01, 2015 9:57 pm Subject: Texas 1952 M38 |
Hello all. New member here from Corpus Christi, Texas. I brought home a 1952 M38 2 weeks ago and have spent the time reading, joining forums, and looking at the jeep everyday, to get as much informati ... |
|