Author |
Message |
Topic: SUCKING OIL |
hill
Replies: 8
Views: 9272
|
Forum: Technical Knowledge Base Posted: Fri Jul 13, 2012 8:25 pm Subject: SUCKING OIL |
Check the PCV valve and line to the PCV valve,could be plugged and not taking care of the blow-by and that is the only way that pressure can escape other than blowing a seal. just a thought. |
Topic: M-38A1 Fuel Filler / Body Question... |
hill
Replies: 3
Views: 4845
|
Forum: Technical Knowledge Base Posted: Wed Jun 20, 2012 7:42 pm Subject: M-38A1 fuel filler neck opening |
I have a 1953 M38A1 and I also had a 1954 model and they both have the large #3 Phillips head screws. |
Topic: Where should I use sealant? |
hill
Replies: 5
Views: 6731
|
Forum: Technical Knowledge Base Posted: Wed Jun 06, 2012 5:59 am Subject: Where should I use sealant? |
I have worked on vehicles for as long as I can remember, I also teach automotive technology at a vocational school and I only use sealents at junction points such as at the corners of the oil pan and ... |
Topic: 6 June |
hill
Replies: 3
Views: 5934
|
Forum: Announcements, News, Humor Posted: Wed Jun 06, 2012 5:41 am Subject: 6 June |
GOD BLESS AMERICA and all of the men who have served and who are now serving and THANK YOU FOR YOUR SERVICES. |
Topic: Clearing out my work shop |
hill
Replies: 12
Views: 16450
|
Forum: For Sale Posted: Fri Jun 01, 2012 6:08 pm Subject: For Sale |
Where are you located |
Topic: Connectors |
hill
Replies: 4
Views: 5390
|
Forum: Technical Knowledge Base Posted: Thu Apr 05, 2012 8:03 pm Subject: Connectors |
John at Midwest has them, here is the link.
http://www.midwestmilitary.net/ |
Topic: Fuel Pump Questions. |
hill
Replies: 10
Views: 15459
|
Forum: Technical Knowledge Base Posted: Thu Mar 29, 2012 9:53 am Subject: Fuel Pump Questions. |
Yes they will and they don't require the spacer that was mentioned in the earlier post. but some of the front covers may need to be modified or the pump may rub the cover. or the pump be modified. I ... |
Topic: windshield frame for an M38 or cj3 |
hill
Replies: 2
Views: 3956
|
Forum: Wanted Posted: Tue Mar 27, 2012 5:32 pm Subject: Windshield frame |
how much do you want for the M38A1 windshield frame. |
Topic: Need some ID Help. |
hill
Replies: 9
Views: 9756
|
Forum: Technical Knowledge Base Posted: Tue Mar 27, 2012 5:30 am Subject: Need some ID Help. |
The first is a generator and the other is a starter both look to be 12 volt for the early four cylinder engine. The starter looks as though it uses a solenoid to work unlike the military ones with fo ... |
Topic: Where is CH2 of TM 9-8012 |
hill
Replies: 8
Views: 10244
|
Forum: Technical Knowledge Base Posted: Wed Mar 14, 2012 7:09 pm Subject: TM-9 8012 |
Try this link I have found this web site very useful on a lot of things it's a public domain site. I hope this helps.
http://www.archive.org/details/TechnicalManualTm9-8012WillysM38 |
Topic: New Member |
hill
Replies: 14
Views: 13191
|
Forum: Announcements, News, Humor Posted: Wed Feb 15, 2012 9:05 am Subject: New Member |
Welcome aboard, always in need of good technicians, and I can foresee needing your expertise in the near future on some rebuilds. |
Topic: rear main seal |
hill
Replies: 2
Views: 5164
|
Forum: Technical Knowledge Base Posted: Sun Feb 05, 2012 4:48 pm Subject: rear main seal |
Go to downloads and download the manual it has all the tech info you need here is the link for the manual. page 87 of this manual has the answer you ask. it says to cut it at 1/4 inch. These downloads ... |
Topic: Engine Rebuild |
hill
Replies: 1
Views: 3083
|
Forum: Technical Knowledge Base Posted: Thu Jan 26, 2012 6:48 am Subject: Engine Rebuild |
I am rebuilding an engine for a 1948 CJ2A and sent it to the machine shop to be bored and cleaned and when I got it back and was checking things over I found that one of the dowels that hold the main ... |
Topic: Petersen's 4 Wheel & Off Road |
hill
Replies: 0
Views: 3065
|
Forum: Technical Knowledge Base Posted: Sat Dec 31, 2011 8:08 pm Subject: Petersen's 4 Wheel & Off Road |
If you can pick up a copy of Jan.2012 issue they have an interesting section on 70 years of the jeep, has some very interesting photos and information on the not so well known models that Willys only ... |
Topic: m38 sagging on rear driver side |
hill
Replies: 3
Views: 4573
|
Forum: Technical Knowledge Base Posted: Thu Dec 22, 2011 12:22 pm Subject: m38 sagging on rear driver side |
See this link it may help http://willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=6122 |
|