Author |
Message |
Topic: M38 - Condensor Failures |
j3shane
Replies: 5
Views: 6474
|
Forum: Technical Knowledge Base Posted: Mon Oct 02, 2017 2:50 pm Subject: M38 - Condensor Failures |
Thanks Wes, will check on those things. I don't believe there is a voltage regulator on this Jeep. Would that cause it and should I add one? If so any recommendations on which one? Thanks |
Topic: M38 - Condensor Failures |
j3shane
Replies: 5
Views: 6474
|
Forum: Technical Knowledge Base Posted: Wed Sep 27, 2017 5:56 pm Subject: M38 - Condensor Failures |
I have an M38 converted to 12v, but still using gutted old mag (points and condensder still used with external 12V coil) with 24V type spark plugs and cables still in use. Ran fine for a couple years ... |
Topic: M38 Distributor and Timing |
j3shane
Replies: 3
Views: 6897
|
Forum: Technical Knowledge Base Posted: Mon Jul 31, 2017 8:27 am Subject: M38 Distributor and Timing |
Thanks for the info Wes. I have not removed the distributor from the block. Not sure on the condition of the inner components as I don't really have anything to compare it to. To me they look ok.
... |
Topic: M38 Distributor and Timing |
j3shane
Replies: 3
Views: 6897
|
Forum: Technical Knowledge Base Posted: Sun Jul 30, 2017 12:13 pm Subject: M38 Distributor and Timing |
Have a 51 M38 that was converted to 12V but the waterproof 24V distributor remains installed and converted to external 12V coil. Set screw came loosed and timing got hosed so working on getting it re- ... |
Topic: M38 Vacuum Lines |
j3shane
Replies: 4
Views: 7474
|
Forum: Technical Knowledge Base Posted: Wed Jan 27, 2016 4:27 pm Subject: M38 Vacuum Lines |
It will be a few days before I can get picks but basically there is no vacuum connected to the motor at all, or wipers. The vaccum connections to the fuel pump are not connected to anything and not su ... |
Topic: M38 Vacuum Lines |
j3shane
Replies: 4
Views: 7474
|
Forum: Technical Knowledge Base Posted: Wed Jan 27, 2016 12:08 pm Subject: M38 Vacuum Lines |
The vaccum lines for my M38 are all disconnected and not routed properly, or missing all together. I saw the chart for the proper line routing so that will help.
My M38 has a Solex carb and the ci ... |
Topic: 1951 M38 numbers |
j3shane
Replies: 9
Views: 10560
|
Forum: Technical Knowledge Base Posted: Sat May 30, 2015 5:20 pm Subject: 1951 M38 numbers |
Serial is 33836 and date is
9-51. M38 |
Topic: 1951 M38 numbers |
j3shane
Replies: 9
Views: 10560
|
Forum: Technical Knowledge Base Posted: Fri May 29, 2015 12:34 pm Subject: 1951 M38 numbers |
About to order mask stencils. I don't have the hood numbers so I am going to use the serial number. Do i start with 20? Also, any recommendations for the other numbers on the bumpers? I get lost in al ... |
|