Search found 34 matches

make offer

Removed this from my Cj2A, fairly new (repop) seat frame made for MB, but front legs modified for a CJ2A mounting brackets. Asking $100 located in Newnan, GA.
Has correct short MB style back seat ...

I forgot to mention, I found the previous shadetree mech had left the oil slinger off the crank- .056 of end play, probably causing most of the noise. He put it in the oil filter housing for future in ...

My F head was noisey when I purchased the jeep, the noise would quiet down around 1500 rpms, and was qiute noisey at idle. During overhaul I found it was the exhaust valve guides worn out and the play ...

I installed one in my D44 in my '53 Cj3B (M606)I did have to unbolt my 5.38 ring gear to install my lockright, road manners are okay just take some getting use to the noises, intermittant pops from t ...

I have read lots of comments on the NDCCs and NDT about wet roads and ice, I experianced some slippage with NDTs when accelerating and cornering but attibuted it to the lockers in both axles and their ...

Looks like fun.

I did the same thing here in GA, last weekend.

http://i52.photobucket.com/albums/g18/willysnut/Snow%20pic%20Feb%202010/jeeppics029.jpg
http://i52.photobucket.com/albums/g18/wi ...

Another cheap method is to use greyhound express shipping- I sent a complete CJ2A cowl, firewall, dash assy wrapped in foam and celophane wrap from Atlanta, GA to New Mexico for a cheap $53. They sai ...

Can do, just though it would be easier if someone had figured it out already.

Thanks

Are the drawings for the remainder of the mount avail too? Shown in the picture of the mounted antenna.

Thanks Wesk.

Does anyone have drawings of the MP-50 antenna mount so I can bend one up for my M606.

Here's what you want the bracket to look like, I don't think Willys works makes them anymore, but an internet search can locate a company the has them.

http://www.film.queensu.ca/cJ3B/Alternator.ht ...

The filter can be cleaned by removing the whole housing and cleaning the whole shebang, it does not come out of the housing.

Who sells replacement parts for my Altek M series taillights, I'd like to replace my blue BO lens with red lens. Not neccessarily looking for the entire lens assy.

Converting my replacement tub for my M606 to military tailights, can you supply me with a picture or drawing showing diameter and measurements to locate the new holes and support bracket. Thanks


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.