Author |
Message |
Topic: Oil Tube loose... jerry rigged fix. |
joe29
Replies: 0
Views: 3132
|
Forum: Technical Knowledge Base Posted: Fri Apr 27, 2018 3:14 pm Subject: Oil Tube loose... jerry rigged fix. |
I overhauled my L 134 and am putting it back together. The Oil Tube was quite loose. Too small for me to use a muffler pipe expander so here is what I did, and I had to pound the tube back into th ... |
Topic: Camshaft spacer between thrust plate and timing gear? |
joe29
Replies: 4
Views: 6385
|
Forum: Technical Knowledge Base Posted: Thu Mar 22, 2018 6:35 am Subject: thanks |
thanks, I'll check it out. Looks like I have to put the gear on to actually check the end play, so I'm glad I made the gear removal tool out of crow's feet in case I need to get it off to shim it.
j ... |
Topic: Camshaft spacer between thrust plate and timing gear? |
joe29
Replies: 4
Views: 6385
|
Forum: Technical Knowledge Base Posted: Wed Mar 21, 2018 1:10 pm Subject: Camshaft spacer between thrust plate and timing gear? |
Thanks so much Wes! I called Midwest Military and they have one. I noticed in my ORD 9 SNL G-740 manual they show a different part number on the graphic, versus the numbers page.
Looks like it ... |
Topic: Camshaft spacer between thrust plate and timing gear? |
joe29
Replies: 4
Views: 6385
|
Forum: Technical Knowledge Base Posted: Wed Mar 21, 2018 9:30 am Subject: Camshaft spacer between thrust plate and timing gear? |
I am overhauling my L134. In the manual it shows a spacer that goes between the thrust plate and the timing gear. I don't think I had one on the cam when I took it apart. I looks to me like the ca ... |
Topic: Timing Gear removal with Crow's feet on L134 |
joe29
Replies: 1
Views: 5338
|
Forum: Technical Knowledge Base Posted: Sun Dec 24, 2017 3:20 pm Subject: Timing Gear removal with Crow's feet on L134 |
I used this method on my M38
Buy two, 2 1/2" 10 mm bolts with nuts and washers
Buy or use, Two 3/8" drive Crow's feet (I used a 7/16" and 11 mm)
A standard timing gear puller like at Autozone ... |
Topic: Cam gear pulling tool |
joe29
Replies: 1
Views: 5565
|
Forum: Photo Posting & Gallery requests/problems Posted: Wed Dec 20, 2017 8:13 am Subject: Cam gear pulling tool |
Wes,
can you set up a photo album for me? I want to show a cam gear pulling tool I jerry rigged.
thanks
joe |
Topic: M38 Parking brake, pivot stud casting boss, broken |
joe29
Replies: 0
Views: 4403
|
Forum: Wanted Posted: Fri Feb 10, 2017 2:52 pm Subject: M38 Parking brake, pivot stud casting boss, broken |
M38 Transfer Case Parking brake pivot stud mount broken
Are there any good ideas about welding the parking brake pivot stud into the transfer case boss? A good chunk (corner) of the casting is br ... |
Topic: Willys Jeep Wanted |
joe29
Replies: 3
Views: 6454
|
Forum: Wanted Posted: Sun Jan 29, 2017 10:51 am Subject: Willys Jeep Wanted |
No longer wanted, I bought a M38 from Midwest Military. Good deal, great guys and parts.
Thanks,
joe |
Topic: Willys Jeep Wanted |
joe29
Replies: 3
Views: 6454
|
Forum: Wanted Posted: Wed Jan 25, 2017 7:03 pm Subject: Willys Jeep Wanted |
Thanks, I sent you an e-mail.
joe |
Topic: Willys Jeep Wanted |
joe29
Replies: 3
Views: 6454
|
Forum: Wanted Posted: Mon Jan 23, 2017 11:14 am Subject: Willys Jeep Wanted |
I live in Northern Minnesota and am looking to buy a M38, M38 A-1 that isn't too far away from where I am located. thanks
218-237-4621
joe |
|