Joined: Apr 15, 2005 Posts: 162 Location: San Diego CA
Posted: Wed Apr 27, 2005 9:30 pm Post subject: fuel sending unit
In My m38a1 I had to install a tank when I got it years ago because it didnt have one. I just got it runningand found that the gas sender is really off. I tried to adjust it by bending the rod to the float. It is really long and the tanknwont register full I have managed to get it accrate at the bottom before I run out of gas but thats it. How long is the rod to the float supposed to be. I think that when I bought it I was supplied with the wrong one. Also is fuel supposed to come out the filler cap when I make turns. The cap is new too
Joined: Apr 15, 2005 Posts: 162 Location: San Diego CA
Posted: Mon May 02, 2005 12:02 am Post subject:
Cant any body answer these questions?
Is gas supposed to come out the filler cap on a turn when the tank is full?
How long is the float arm on the fuel sending unit for an M38a1 supposed to be?
Joined: Apr 14, 2005 Posts: 285 Location: Livermore Ca.
Posted: Mon May 02, 2005 9:16 pm Post subject:
I have what I believe to be 2 m38a1 senders, their 5.5 inches from center of float to piviot
are you running a vented gas cap?
does gas tank have a vent? or cloged vent line?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum