Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Sat Jul 07, 2012 6:12 am Post subject: M-38 / M38A1 Copper Vent Lines...
M-38 3/16" Copper vent lines with tube nuts and loom assembled and ready to install as per the SNL G-740; consisting of 3 lines:
8676980
TUBE, IGNITOR VENT, assy (9")
8676981
TUBE, IGNITOR VENT TO WIPER, assy (27")
8676982
TUBE, gas tank vent, assy (86")
$25.00 plus $8.00 Shipping USPS Priority Mail
M38A1 3/16" Copper vent lines with tube nuts and loom assembled and ready to install as per the SNL G758; consisting of 8 lines:
8328408
LINE, crankcase to cylinder head, assy (19 3/8 in lg)
8677619
LINE, air cleaner to elbow assy (at dash) (used on vehicles through serial No. 29295) (22 1/2 in. 1g)
8677523
LINE, carburetor ventilator, assy (9 1/16 in. lg)
8673356
LINE, distributor to air cleaner tube, assy (13 in. lg)
8673357
LINE, distributor to vacuum line tee, assy (26 in. lg)
8677028
LINE, elbow to union, assy.(at dash) (used on vehicles through serial No. 29295) (16 1/2 in. lg)
WO-808926
LINE, fuel tank to elbow, assy (at tank) (used on vehicles after serial No. 22336 and through serial No. 23359) (30 3/4 in. lg)
WO-806428
LINE, master cylinder to union, assy (at dash) (used on vehicles through serial No. 29295) (29 in. lg)
$40.00 plus $8.00 shipping USPS Priority Mail
All lines are about an inch longer than needed to allow for adjustments...
Lines will be coiled as needed for shipping.
I accept PayPal (use my email address), Check or MO; Cash at your own risk... email me and I will provide address...
If interested contact me...
Please contact me by clicking on the email button below... please State type of vehicle and Vent Lines in the subject... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
I have a 1953 M38A1, ser# 53953.It was highly "civilianized" when I purchased it in the 70's. I am restoring it and the vent system. How much would a set of complete vent lines cost, fittings included? The fuel tank has a funnel shaped ventilation fitting on the top, but no vent line, which I am willing to restore, along with the parts of the fording system, which were not there, but I have purchased.
Clarick Brown
Berkeley, Calif
cgbinv@comcast.net
510-812-3704
M38A1's built after MD23359 did not come with the basic fording vent system. The vent valve you have on your tank is correct for your M38A1 and any other M38A1 after SN MD23359. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
