Posted: Fri Aug 22, 2014 11:46 am Post subject: fuel line size??
can some one tell me what dia the fuel line from the fuel pump to the carb is suppose to be? mine has 5/16 to the pump and 1/4 from the pump to carb.its a m38a1 with a civilian yf carb on it, any one ever rebuilt one of these fuel pump????
Joined: Nov 01, 2011 Posts: 199 Location: Escondido, CA
Posted: Fri Aug 22, 2014 5:22 pm Post subject:
Looking at Fig. 03-3 in the ORD 9 for the fuel section of the fuel & vacuum pump, I see that the inlet and outlet elbows are both the same: P/N 137422. Going to the fuel pump section of the parts list in same, on page 93 I find P/N 137422 described as 5/16 tube, which leads me to believe that the line from the fuel pump to the carburetor should be 5/16". The line assembly with a tube and two nuts is listed lower on that page, but no size is indicated. _________________ Jim McKim
1952 M38 son-father project
Slowly turning rusty parts into OD parts
If you look at page 93, in section 0306, of the M38A1 ORD 9 you will see 13 lines from the bottom of the page the line you seek. ORD # 8329618, Line, Carb to fuel pump. Then below that you see "Composed of:" then you see "ORD # 44-T-5319-65" "Tube (40 1/2" long) steel. Now move on to the end of section 0306 and misc tubing is listed there with it's ID. In you case see ORD # 44-T-5319-65, "Tubing, Steel, Cold drawn, Round, , 5/16" OD, 0.028" wall thickness" _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum