head light buckets

buzzk · Posted: Sat Dec 20, 2014 4:58 pm Post subject: head light buckets

can the difference be told between the passenger side and driver side headlight buckets mine where tagged but when they blasted them the tag fell off so which is which are they marked buzz

wesk · Posted: Sat Dec 20, 2014 7:08 pm Post subject:

The two housings are the same. Check your parts manual SNL 9-G740
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

buzzk · Posted: Sat Dec 20, 2014 10:19 pm Post subject: buckets

I know they are the same, I'm talking about the head light aiming I guess I should have been more specific, They were not taken apart, as to which side can you tell the difference they go buzz

wesk · Posted: Sat Dec 20, 2014 10:33 pm Post subject:

The headlights are aimed on a vehicle as it set that day. If you have removed the buckets and made any changes to the sheet metal, suspension or frame the old alignment will be useless. So just throw them in either hole and spend about 20 minutes aligning them if they end out of alignment or you may need to switch them or you may just get lucky and they are still aligned.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

G740 · Member Joined: Jan 27, 2006 Posts: 498

Buzz,
The adjustment screws that would be considered the side angle adjustment would be on the outside edge, or facing outboard on the grill.
John

wesk · Posted: Sun Dec 21, 2014 11:06 am Post subject:

The buckets and mountings are identical. The inner mounting would place the horizontal adjusting screws to the passenger side for both units. The manual illustrations show the right headlamp only. It would not be possible to reverse the lamp mounting to reverse the horizontal adjusting screw to be outboard on the driver's lamp. The three mounting screws are not equally spaced. A lot of folks get fooled by this manual illustration. Then when they try to rotate the driver side inner lamp mount they see that any position other than identical to passenger side results in misaligned screws.

_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.