Posted: Tue Oct 18, 2016 6:20 pm Post subject: Lots of Jeep parts for CHEAP
UPDATE: I added prices to most of the parts. Prices are negotiable.
I'm essentially parting out a 1953 CJ3B because I've decided that I do not want or need any of these parts for the direction that I'm going to go with.
Here is a brief list of some of the parts and what condition they are in:
Ross steering gearbox - splines are severely rusted where steering wheel mounts - $40
Steering tie rods - $10 each
Rear tow hitch - $30
Transmission cross member - $10
Belhousing - $20
Skid plate - $5 SOLD
Transmission tunnel cover - $5
Front driveshaft - $20 SOLD
Rear driveshaft - $20 SOLD
Front leaf springs - Rusted, but can be fixed - SOLD
Rear leaf springs - Rusted, but can be fixed - SOLD
F134 Oil pan with skidplate - Very solid, only light surface rust - $30
F134 camshaft - light surface rust - $30
F134 Air cleaner - $10
F134 Connecting rods - $10 each
Brake, clutch pedals and components - $10 SOLD
Dana 25/27 knuckle with seals - $10
Engine mounts that were removed from frame - Good condition, I torched out the rivets to remove them. - $5 SOLD
Complete but disassembled T90 transmission and Dana 18 transfer case - The transmission was filled with water and there is a lot of damage to the cluster gear but all other gears seem to be in good condition. The transfer case worked fine and there is no damage to the components, took it apart to replace the bearings but never did.
T90 Transmission - $150
Transfer Case - $150
Parts that I have yet to photograph -
Complete but disassembled F134 engine - block, heads, crank, rods, pistons, etc. Was not running when I took it apart, 1 piston was seized due to rust because water got in the cylinder. I had a machine shop remove the piston and begin to bore the block. I'm not sure where its stands but all the bores look to be in good condition. - Will add price when I upload pictures
Sandblasted and painted frame - I sandblasted and painted the frame a few years ago before this project was put on hold. There are many spots that are almost rusted through that I was going to cut out and weld in new metal but never did. - Will add price when I upload pictures
Front Dana 25 differential assembly SOLD
Rear Dana 44 differential assembly, 5.38 gears. Does not come with wheels and tires. - Will add price when I upload pictures
Like I said I'm a very motivated seller because I just don't want this stuff, it's been sitting around for years and I've decided to get rid of it. I can't bring myself to just throw it away because I know there are people out there that want these parts. Send me a private message or email me at rangersmustang@yahoo.com
I live in Houston, Texas btw.
Thanks.
Last edited by Ranger on Wed Nov 30, 2016 7:41 pm; edited 2 times in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum