Horn assembly

Claudio · Posted: Sat Feb 17, 2018 3:44 pm Post subject:

Thanks Brian for the prompt reply!!! It seems that it might be easier to get this part and have it shipped to Brazil than trying to machine it and threading it as I thought.
All best! Claudio
Laughing

4x4M38 · Posted: Sat Feb 17, 2018 7:29 pm Post subject:

Hi Claudio!
With a lathe it would not be too difficult.

The one I bought appears to be aluminum.
I believe you would want to machine it,
then while still in the lathe drill and tap.

I think.

Mine is split at the threaded end, I'm guessing
to help hold it on the threads. Although that
doesn't make much sense.

Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

Claudio · Posted: Mon Feb 19, 2018 1:03 pm Post subject:

Thank you again Brian! The dismeter of this item seems to be easy to suggest, of course enough to fit in the steering wheel column of the upper end. The height of it may be taken by scale.
Restoring a vehicle over here and depending on imported parts is always a bad issue, so thanks for your attention Brian.
Wes has been patient with me since a long time, he knows my problematic!!!
And finally, accept my excuses for my weird English at writing.

4x4M38 · Posted: Mon Feb 19, 2018 5:00 pm Post subject:

I can provide a few dimensions if you want to hog one out.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

Claudio · Posted: Tue Feb 20, 2018 2:50 am Post subject:

Sure it would be nice. Thank you!
Claudio

4x4M38 · Posted: Fri Feb 23, 2018 1:24 pm Post subject:

Hello Claudio,

It appears aluminum.

I believe the thread is 4-40, although mine feels a little sloppy with a 4-40 screw in it. If you have the rod, thread the fitting to match.

http://willysmjeeps.com/v2/modules/gallery/albums/album372/button1.jpeg

http://willysmjeeps.com/v2/modules/gallery/albums/album372/Button3.jpeg

http://willysmjeeps.com/v2/modules/gallery/albums/album372/Button2.jpeg

Note the taper on the small end that goes down into the tube, and the taper into the bore for the threads.

Take care,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

Claudio · Posted: Fri Feb 23, 2018 2:01 pm Post subject:

Wonderful Brian!!! Thanks so much !!!


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.