Joined: Feb 15, 2018 Posts: 12 Location: cebu philippines.
Posted: Fri Apr 20, 2018 10:03 pm Post subject: L134 sump pan
I have finally managed to extract a well stuck sump pan from my L134 motor . As you can imagine the original sump gasket is shredded . Problem for me is, i live in a remote area of the Philippines .....cant get the proper replacement off the shelf ,so no alternative but to make my own . There must be somebody out there who has made a succesful replacement at some stage .I have access to gasket making compound (tube stuff) also tough ish brown paper (fairly thick) would a combination of the two work ???
Do not use RTV type sealer/adhesive anywhere near oil system components. Stay with the Permatex style of gasket sealers and gasket makers. If you must fabricate a gasket use sheet cork in a thickness of not more than 1/8" thick.
If you have a mailing address then I suggest you be patient and order a gasket.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum