Speedo drive cable

[ROBCDN3]

On my M38a1 speedo the drive cable has different ends one is square and the other is a long pointy one. which end goes where , to trans and to the speedo. 71 M38a1 cdn 3 c Rob Thanks in advance

[wesk]

Square in the speedo and pointy long one with small fin in the drive gear.


This illustrates connecting the stock drive gear to a sender for an electric speedo but the shortened drive cable accurately represents the tips of the stock cable.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[ROBCDN3]

Thanks Wes My speedo is the problem then it has a round hole , must have been damaged years ago speedo was always very bouncy.
Rob 1971 M38a1cdn3c

[wesk]

The entrance to the square drive hole is round on all of them.




_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[ROBCDN3]

Thanks Wes Mine started working again will leave it alone till it stops 71 M38a1 cdn3 c Rob