Toe-in in Degrees?

[arisLgr]

Hi to all,
Besides the 1/8 to 3/16 distance as per the manuals and all discussions, is there the equivalent measurement in degrees I can give to the shop with the modern equipment so they can adjust it?
Thanks ahead once more![/list]
_________________
Aris
Willys M38
1936 Cord Phaeton
1954 Mercury Monterey
1968 Corvette Stingray
1973 Mercedes 350SE
1974 Montesa Cota 247T
1982 Kubota B7100

[RonD2]

Hi Aris,
There's on-line calculators.
Here's one: https://robrobinette.com/ConvertToeInchesToDegrees.htm

I bet your alignment shop can also do it.

Good luck!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

[arisLgr]

Thanks Ron, the shops here are not that qualified, neither am I in math, but with your kind link i eill manage:) 👍👍👍
_________________
Aris
Willys M38
1936 Cord Phaeton
1954 Mercury Monterey
1968 Corvette Stingray
1973 Mercedes 350SE
1974 Montesa Cota 247T
1982 Kubota B7100