| View previous topic :: View next topic |
| Author |
Message |
Dragnet
Member
Joined: Aug 06, 2006
Posts: 44
Location: West Michigan
|
 Posted: Tue Oct 03, 2006 6:09 pm Post subject: Need pics of back seat mounts |
 |
|
| Hi could someone take some pics of how the back seat brackets go on. I did find the screw holes under the bondo but I'm just not sure because the brackets I bought don't seem to line up. 1952 M38A1 BTW. Thanks. |
|
| Back to top |
|
 |
Ryan_Miller
Site Administrator
Joined: Apr 03, 2005
Posts: 1634
Location: Kansas
|
| Posted: Tue Oct 03, 2006 8:06 pm Post subject: |
|
|
Bob Collins should have some photos from his M38A1 restoration.
I looked on his photo gallery, but did not see anything.
I'll send him a message.
_________________
Ryan Miller
MVPA # 22010 |
|
| Back to top |
|
|
Bob_C
Site Administrator
Joined: Apr 03, 2005
Posts: 271
Location: Chester County, PA
|
| Posted: Tue Oct 03, 2006 8:39 pm Post subject: |
|
|
Hi,
I will try to get you some photos tommorrow. I looked and dont have any good ones that show that area.
Which brackets are you exactly talking about? The ones ont he back panel that hold the seat upright or the spring steel ones / plates with the U cut on them to hold the seat in place? Or heck, do you need everything?
_________________
Bob Collins
1954 M38A1 MD79056 |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16253
Location: Wisconsin
|
|
| Back to top |
|
|
Dragnet
Member
Joined: Aug 06, 2006
Posts: 44
Location: West Michigan
|
| Posted: Wed Oct 04, 2006 8:21 am Post subject: |
|
|
AHHHH... That's where that one on goes...Perfect! Thank you guy so much! Fantastic. Now if I line up the holes for my square one it doesn't rest or touch the bottom of the tub. Is that going to be a problem? It's about 1/8in about it. If I use the holes that are already there.
loopbackzero please feel free to still add yours as well. |
|
| Back to top |
|
|
wesk
Site Administrator
Joined: Apr 04, 2005
Posts: 16253
Location: Wisconsin
|
| Posted: Wed Oct 04, 2006 8:31 am Post subject: |
|
|
If you're talking about the one in the 3rd photo it must sit on the floor to support the weight of the seat. It is spot welded on so I would ignore the holes and spot weld it where it belongs. If you have holes in both the wheel house and the bracket then both had the spot welds drilled out and spot welds do not hit the same spot in every jeep.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
