If you can't see any threads or thread forms on the bottom of the ball odds are it's press type. You can drill a 3/16-1/4" hole and probe the shaft for threads. The hole can be filled and touched up later. If there are threads then drill the same hole on the opposite side insert 3/16" or 1/4" bolts for handles and try turning it off. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
The simple way is to hold the handle horizontally in a vise. Adjust the vice almost snug but the handle must slide left/right easily. Now move the handle so the tranny cover or the base socket of the handle is against the side of the vice. Now slam it the other way knocking the ball off. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum