Posted: Sun Oct 16, 2016 10:52 am Post subject: Fuel pump
I posted this in my project thread, but figured it better to put it here.
I bought a fuel pump from EBay (https://www.ebay.com/itm/300844203386 ) and received it. The lever doesn't seem to move very much. Is there some sort of release pin or something I am missing?
It's a good idea to not cap the vacuum portion of the pump. If you follow the vacuum plumbing properly you will still need to run all lines from the pump to the intake and the pump to the wiper "T" and from the wiper "T" to the distributor and from the distributor to the air cleaner inlet. You can cap the wiper side of the wiper "T" until you need to hook up wipers. The distributor plumbing insures the ionized (explosive) gases do not remain trapped in the distributor housing. Also helps with cooling the coil. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Aug 31, 2015 Posts: 29 Location: Asheboro, NC
Posted: Mon Oct 17, 2016 3:59 am Post subject:
The manual primer does not move very much. The arm actuates a small piston-like device that pushes on the diaphragm. This is a new reproduction unit. You shouldn’t be missing anything. _________________ Old fashioned service never goes out of style.
Joined: Jun 15, 2014 Posts: 268 Location: Cambridge, Ontario, Canada
Posted: Mon Oct 17, 2016 8:44 am Post subject:
The pump lever is very hard to move by hand. Even snug in a vise(careful not to crack housing) it is very hard to move. I was testing vac pressure and had a tube as leverage so I could pump mine during testing _________________ 1952 M38 project
Brad
if I am in a hurry I clamp the pump's lever in the vise and pump the pump housing.
One item that always seems to get overlooked is the pump actuating cam at the front end of the cam. This cam will often be found worn down almost circular offering hardly any pump stroke at all.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum