Posted: Sun Jul 02, 2017 12:20 pm Post subject: M38 With too many holes in the frame
Finally have the M38 down to the frame and the PO drilled several holes on the frame rail sides and underside to accommodate a different motor and transmission positioning. I am in the process of filling those extra holes in and need a couple pictures of what holes should be in the frame rails between the front/rear spring hanger bracket and rear/forward spring hanger on both sides. I have reviewed the M38 reference but it does not cover all of the hole locations in the frame. Your help is greatly appreciated. Thank you
Update: I found Wes' photo gallery of the frame rails. It answered some questions but I need to see a picture of the frame around the pivot bracket for the pedals. There are nine holes drilled in the side and lower edge of the frame in this area. I think that may be excessive
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum