Joined: Nov 27, 2016 Posts: 61 Location: Rhode Island
Posted: Sun Nov 19, 2017 12:37 pm Post subject: M38A1 Vent Line Tech Question
Howdy all,
I'm in the final stages of completing the vent lines on my '54 M38A1 and I've got a technical question. I see from ORD 9 SNL G-758, that the vac line that runs from the fuel pump to the crankcase vent T is 5/16" steel, but the vac line that runs to the T that leads to the wipers and the distributor is 1/4" steel. Just curious as to why the difference in the tube diameters. Thanks in advance for the tech education!
I would imagine that the flow requirements of the two branches were less then the total requirement at the "T". _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
